something just clicked,

has anyone ever compared an FJ20 crank to a Z22/Z24 crank?
if it uses the same big ends and mains whats all the spacing like
would it be a good swap for a FJ24?


----- Original Message -----
From: "E Smith" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, February 06, 2002 7:39 PM
Subject: RE: U.S. guy needing info on FJ stuff


> The bearings for te FJ are the same as L series engines, the rings  and
> gaskets are available but are about  $180 US for both gaskets and rings
plus
> freight.
>
> Cheers
> Feral Errol
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of T Mac
> Sent: Wednesday, 6 February 2002 6:40 PM
> To: ozdat
> Subject: U.S. guy needing info on FJ stuff
>
> To the list,
>
>  I have run into a little problem with my FJ. The
> motor, when cold, makes a whining sound when the RPMs
> get above 1500, however when the engine is at normal
> operating temperature it begins to whine around 4500
> RPMs. I am using this problem as an excuse to rebuild
> the motor. Anyhow, I'm sure most of you know that FJ
> parts are scarce in the U.S. I have a new timing
> cover/ oil pump, all the chains, gears, tensioners and
> guides, but i am lacking all the gaskets, rings and
> bearings. If anyone could possibly have info about my
> engine trouble and/or acquiring these few items that I
> need, it would be greatly appreciated.
>
> Thanks in advance,
> T.J. Mac
>
> __________________________________________________
> Do You Yahoo!?
> Send FREE Valentine eCards with Yahoo! Greetings!
> http://greetings.yahoo.com
>
>

--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to