Re: Pistons

[andrew smith]

David, 32.1mm for comp height plus 48mm for half z24 stroke plus 145.9mm for L20 rod is 226mm which is 1.45mm short of the 227.45mm z20 deck height. Andrew Smith David Costello wrote: I'm lost hehe sorrywhich is the distance from the centre of the pin to the top of the piston the guys at ATS put RB30ET pistons in their Z18 monstersupposedly gave 6.5:1 comp ratio, and only required a 0.040" overbore I'm just trying to work out what compression they would give me with my Z24 crank and L20 rods in a Z20 block Dave ----- Original Message ----- From: Terry Rudd To: [EMAIL PROTECTED] Sent: Tuesday, February 12, 2002 10:08 PM Subject: RE: Pistons  David,The ACL catalogue give the following data on the RB30T enginePart Number                   - 6MKRY9301Units Of Measure              - MetricBore size                     - 86Head Type                     - 119Compression Height            - 32.1Distance Between Bosses       - 24Piston Overall Length         - 64Pin Number                    - R3347Pin Diameter                  - 21Locking Device                - CCClearance                     - 0.025Position                      - 45.3Comp Ring Quantity 1          - 1Comp Ring Quantity 2          - 1Comp Ring Quantity 3          - 0Comp Ring Quantity 4          - 0Oil Ring Quantity 1           - 1Oil Ring Quantity 2           - 0Comp Ring Width 1             - 1.5Comp Ring Width 2             - 1.5Comp Ring Width 3             - 0Comp Ring Width 4             - 0Oil Ring Width 1              - 2.8Oil Ring Width 2              - 0Comp Ring Depth 1             - 3.9Comp Ring Depth 2             - 4.5Comp Ring Depth 3             - 0Comp Ring Depth 4             - 0Oil Ring Depth 1              - 3.6Oil Ring Depth 2              - 0Comp Ring Type 1              - Comp Ring Type 2              - Comp Ring Type 3              - Comp Ring Type 4              - Oil Ring Type 1               - Oil Ring Type 2               - ============================== -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of David Costello Sent: Tuesday, 12 February 2002 10:05 PM To: Ozdat Mailing List Subject: Pistons   anyone have specs on VL Turbo pistons??pin height, bore, dish size ?? Thanks Dave --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ ---------------------------------------------------------------------