HAHAHA never mind man im in victoria australia
but thanx heaps for the thought Leighton ----- Original Message ----- From: "Terry Rudd" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, February 16, 2002 8:01 PM Subject: RE: lOOKING FOR 240 k FRONT END > Leighton, > It will be somewhere on the South Island of New Zealand. > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Leighton > Sent: Saturday, 16 February 2002 7:32 PM > To: [EMAIL PROTECTED] > Subject: Re: lOOKING FOR 240 k FRONT END > > > where is it that its 3 hours away and what kind of money > ??? > > thanx heaps > leighton > > > ----- Original Message ----- > From: "maldat" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Saturday, February 16, 2002 3:46 PM > Subject: Re: lOOKING FOR 240 k FRONT END > > > > I might be able to come up with a pair,I know of two parts car C110 > coupe's. > > Its about 3 hour drive and guy has no phone,But I can ring him at work at > lunch > > time's. > > They will cost,,but if you really want them I can get you a pair. > > > > Malcolm > > > > Terry Rudd wrote: > > > > > Leighton, > > > > > > Pass on the 240K legs, there was a 240K (blue) at Dunkers a couple of > weeks > > > back that was complete but the way stuff gets shifted there it's highly > > > unlikely to be there - it had a full set of QI lights too. > > > > > > On R31 rears, some combos work well with just the inbuilt proportioning > in > > > the master cyl. 200B/R31 with 13/16 Sunny cylinder is one, although you > need > > > fairly similar range pads for it to work well. > > > > > > regards > > > Terry > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED]]On Behalf Of Leighton > > > Sent: Thursday, 14 February 2002 5:57 PM > > > To: [EMAIL PROTECTED] > > > Subject: lOOKING FOR 240 k FRONT END > > > > > > I know its a long shot but if any one has got a 240K front end they > wanna > > > get rid off could you please let me know???? i am looking for one > > > > > > alos im going to put the R31 skyline disc brakes on the rear end of my > > > 1600 - to get them to work properly do i need a proportion valve or will > > > they work without one??? > > > > > > thanx > > > > > > Leighton > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
