I must say that I assumed that they had the same as a L18 at 130.2 But after pulling one down and measuring one... they seem to be the same as L16 rods at 133 (still had the piston attached so it wasn't real accurate)
Terry Rudd wrote: > The factory specs are the "distance between centres of small end and > big end bearings" which has to be what you asked for as it's the way > that I was taught to measure a rod. Some L18 and Z18 specs vary, the > head volume is 41cc on L18 and 45.2cc on Z18, I know there are other > differences.I thought Errol once said he has a Z18 manual.regardsTerry > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of > David Costello > Sent: Tuesday, 19 February 2002 7:09 PM > To: [EMAIL PROTECTED] > Subject: Re: Z18 specs > > I'm starting to get confused hereErrol said the Z18 rods are > 3mm longer than the L18and at the same time I got an email > from someone else saying they are exactly the same and that > perhaps errol was thinking of L16 rods, cause I know they're > 133mmI've got specs for all the Z motors cept the Z18so I'm > assuming L18 and Z18 specs are all the same ? Dave > > ----- Original Message ----- > From: Terry Rudd > To: [EMAIL PROTECTED] > Sent: Tuesday, February 19, 2002 11:20 AM > Subject: RE: Z18 specs > Interesting, my listing (Nissan factory) has L14 > at 136.6mm, L16 at 133.0mm, L18 at 130.35mm and > L20B at 146.0mm but I haven't got data on a > Z18.regardsTerry > > -----Original Message----- > From: > [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On > Behalf Of David Costello > Sent: Tuesday, 19 February 2002 12:06 PM > > To: [EMAIL PROTECTED] > Subject: Re: Z18 specs > > and the pistons in turn are 3mm > shorter? I've got the L18 rods listed as > 130.2so are the Z18 pistons 133.2 ? or > just 133 and my L18 listing is > wrong Dave > > ----- Original Message ----- > From: E Smith > To: > [EMAIL PROTECTED] > Sent: Tuesday, February 19, > 2002 5:48 AM > Subject: RE: Z18 specs > > Rods are 3mm longer 130 vs > 133mm > > Cheers > > Feral Errol > > -----Original Message----- > From: > [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On > Behalf Of David Costello > Sent: Tuesday, 19 February > 2002 2:02 AM > To: Ozdat Mailing List > Subject: Z18 specs > > are Z18 specs (rod length, > stroke length and piston > height) all the same as L18 > ones? > > I was looking on Jason's > motorspecs site and there's no > Z18 listings on there anywhere > > Dave > > > >--membersozdat------------------------------------------------------- > > OZDAT Mailing List Please > Note:- > Send (un)subscribe requests to > [EMAIL PROTECTED] > Send submissions to > [EMAIL PROTECTED] > > No unauthorised redistribution > of this email > http://www.oz > at.com/ozdatonline/index.htm > http://www.ozdat.com/ozdaton > ine/listindex.html > http://www.mail-ar > [EMAIL PROTECTED]/ > > >--------------------------------------------------------------------- > > >--membersozdat------------------------------------------------------- > > OZDAT Mailing List Please > Note:- > Send (un)subscribe requests to > [EMAIL PROTECTED] > Send submissions to > [EMAIL PROTECTED] > > No unauthorised redistribution > of this email > http://www.oz > at.com/ozdatonline/index.htm > http://www.ozdat.com/ozdaton > ine/listindex.html > http://www.mail-ar > [EMAIL PROTECTED]/ > > >--------------------------------------------------------------------- > > > --membersozdat------------------------------------------------------- > > OZDAT Mailing List Please Note:- > Send (un)subscribe requests to > [EMAIL PROTECTED] > Send submissions to > [EMAIL PROTECTED] > No unauthorised redistribution of this > email > http: > /www.ozdat.com/ozdatonline/index.htm > http://www.ozdat.com/ozdatonline/lis > index.html > http://www > [EMAIL PROTECTED]/ > > --------------------------------------------------------------------- > > > --membersozdat------------------------------------------------------- > > OZDAT Mailing List Please Note:- > Send (un)subscribe requests to > [EMAIL PROTECTED] > Send submissions to [EMAIL PROTECTED] > > No unauthorised redistribution of this email > http://www.ozdat.com/ozdatonline/index.htm > http://www.ozdat.com/ozdatonline/listindex.html > http://www.mail-archive.com/membersozdat@datasc > ibe.com.au/ > ----------- > --------------------------------------------------------- > > > --membersozdat------------------------------------------------------- > > OZDAT Mailing List Please Note:- > Send (un)subscribe requests to [EMAIL PROTECTED] > Send submissions to [EMAIL PROTECTED] > No unauthorised redistribution of this email > http://www.ozdat.com/ozdatonline/index.htm > http://www.ozdat.com/ozdatonline/listindex.html > http://www.mail-archive.com/[email protected]/ > ----------------------------------------------------------- > --------- > > > --membersozdat------------------------------------------------------- > OZDAT Mailing List Please Note:- > Send (un)subscribe requests to [EMAIL PROTECTED] > Send submissions to [EMAIL PROTECTED] > No unauthorised redistribution of this email > http://www.ozdat.com/ozdatonline/index.htm > http://www.ozdat.com/ozdatonline/listindex.html > http://www.mail-archive.com/[email protected]/ > --------------------------------------------------------------------- -- ________________________________________________________________________ James Fitness Director Data Scribe Australia Pty Ltd http://www.datascribe.com.au Computers and Supplies OZDAT Online http://www.ozdat.com/ozdatonline/index.htm --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
