NZ I'm sure
We have them here,Comen on a mini,ford 1600cc kent engine
It will work the best a single can.
It will fit a L20B gasket but you might need to file out for the water out/in let,depending on what one you have.
A new Lynx mani for twin webers costs over $600nz now.
Malcolm
damien cm wrote:
Hi,
I got a inlet manifold and a single sidedraught DHLA45 Dellorto over the weekend.
The manifold is to suit a L18 and is not like your average manifold. The two outside runners (1 and 4) go to one side of the carb, and the two inners go the other side(2 and 3). The runners don't go straight from the closest carb barrel to the inlet ports. The brand is LYNX, not sure where it is made.
I am not sure why,but could it have something to do with the motor 'sucking' fuel/air mixture alternately from each barrel of the carb, instead of 2 sucks on one side and then 2 on the other?
I s it worth keeping(I have a conventional one already on the car with a 45 s/s weber.
If it is of a L18 can I bolt it to a L20?
Thanks, I'm clueless......\
Damien
MSN Photos is the easiest way to share and print your photos: Click Here--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
