thanks for the reply, but i have just one more question! Is there any way to decrease 
the track width on a 1600 with 240K struts? (i know it sounds stupid) I have some rims 
with the wrong offset that stick out too far on the front. I would like to be able to 
tuck them under as they are nice rims! Thanks.

--- "Terry Rudd" <[EMAIL PROTECTED]> wrote:
>Mark,
>
>Springs too hard - I didn't think they made them too hard as we like them
>hard.
>
>You can use 1600 springs with 240K struts as they're the same diameter. It's
>very unlikely that they will vary the suspension height much as a stock
>height 1600 spring for 70+ struts are fairly short in comparison to 240K
>springs.
>
>On the engine starting issue, you've verified two out of the three things
>required to fire.
>
>Check that you have spark at the plugs and that it's arriving on time and it
>should be a goer.
>
>1. fuel and air in correct proportion
>2. compression in sufficient quantity
>3. spark strong and on time
>
>regards
>Terry
>
>-----Original Message-----
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED]]On Behalf Of Mark Firman
>Sent: Monday, 25 February 2002 5:15 PM
>To: [EMAIL PROTECTED]
>Subject: a few queries
>
>
>Hi, i was just after any ideas or suggestions on a couple of queries of
>mine, any thoughts would be helpful, thanks.
>
>1. My 1600 has 240K struts and springs, and the springs are WAY too hard. I
>have some 1600 springs, can i put those in? Will it raise or lower the car?
>
>2. I also have an L20B that cranks over really well on the starter but just
>wont fire. It has a single weber and i am confident the fuel is getting
>there, but it just wont start! Also compression is good in 3 cylinders but a
>little lower in the 4th. Any ideas on how i can get this engine going? (this
>engine is out of a 1600 that was in a front end collision if that helps?!?!)
>
>I really want to get this engine going, so if anyone has any ideas that
>might help it would be great!
>Cheers, Mark.
>
>_____________________________________________________________
>Get Your free Ozdat Email Account
>---> http://www.ozdat.com
>
>

_____________________________________________________________
Get Your free Ozdat Email Account
---> http://www.ozdat.com

_____________________________________________________________
You deserve a better email address! Get personalized email @yourname
or @yourcompany from Everyone.net --> http://www.everyone.net?tag

--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to