How much Malcom? Cheers Feral Errol
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of maldat Sent: Tuesday, 5 March 2002 5:52 PM To: [EMAIL PROTECTED] Subject: Re: 1600 rubber engine mounts???? Use the early 1600OHC cam cover with the chrome filler cap,as it is lower and clears the bonnet.. Thats on a L20B Malcolm Richard Clough wrote: > The easiest way to get an L20 to sit under the bonnet is to cut the LH > engine mount metal bracket vertically, then reweld it so the LH engine side > is slightly lower, 5mm offset is more than enough. After grinding the > welding flush and repainting black nobody will detect this modification > under the manifolding. > Alternatively use a side draft carby set up. > ----- Original Message ----- > From: "Leighton" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, 28 February 2002 15:15 PM > Subject: Re: 1600 rubber engine mounts???? > > > i need these for a L20B into a 1600 - does those mounts let the motor sit > > low enough so the bonett clear the engine??? > > > > thanx > > > > Leighton > > ----- Original Message ----- > > From: "Andrew Greenbury" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Thursday, February 28, 2002 2:58 PM > > Subject: Re: 1600 rubber engine mounts???? > > > > > > > Hi Leighton, > > > > > > Cant you use some from a 180b or 200b or B'bird, therefore get > > > some at the wreckers? > > > > > > Andrew > > > > > > > does anyone have any or know where i can get some??? > > > > > > > > > > > > ta > > > > > > > > Leighton > > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
