Hey Guys, I have a set of later model Hilux 4 Spot Calipers which i have been using...the problem im having is when i bleed the braking system the front calipers are not pushing the pistons far enough out and the system requires a couple of pumps to get a firm pedal...
1. my theory is that the calipers are designed for a thicker disk (ie vented) and cannot perform well on the current skyline cross-drilled rotor.. 2. My Master Cylinder is undersized and is not moving enough fluid to activate the calipers properly Either way i would like a set of vented rotors, used or new. In the meantime im planning on getting some 4-6 mm Spacers made and putting them behind the pads to move them closer to the the rotors to get a good pedal...what are your thoughts on this? sorry about the Essay tim PS the 2 door is almost done! it will be on the road in a short while! _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
