Bob, some good reading material can be found at... http://www.jetlink.net/~okayfine/sutech.html http://home.istar.ca/~datsun/att06.htm
If you unscrew the black cap on top of the carbies and pull the plunger out you should be able to see oil in the plunger chamber - or not if it is empty!. This is one of the most annoying things about SU's, they eat this oil, you should check it at least every week. Top them up to just over the inner shoulder with motorcyle fork oil - or whatever gives you a good balance between performance and economy. Hope this helps, Nick > > From: Bob <[EMAIL PROTECTED]> > Subject: Twin SUs, problem? > Date: 21/05/2002 15:49:14 > To: [EMAIL PROTECTED] > > Hello membersozdat, > > Im not really up to speed on SUs, so bear with me. I just checked > the plunger thingos on the tops of my carbies, and as I pulled one > of them in and out it had some resistance, like it was going up and > down against oil, but the other one moved quite freely. Would I be > right in assuming there is something wrong with the second one that > moves so freely? If so, what could it be, how would I check it? > > -- > Best regards, > Bob mailto:[EMAIL PROTECTED] > > This message was sent through MyMail http://www.mymail.com.au --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
