hi, check the oil level in the su`s. and make sure they have both the same thickness oil. i usually use sewing machine oil. stick ya finger in the su with both plunger s out, and lift each damber up, and check if they both go up and slide down free and smooth too.
mark k ----- Original Message ----- From: "Bob" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, May 21, 2002 3:19 PM Subject: Twin SUs, problem? > Hello membersozdat, > > Im not really up to speed on SUs, so bear with me. I just checked > the plunger thingos on the tops of my carbies, and as I pulled one > of them in and out it had some resistance, like it was going up and > down against oil, but the other one moved quite freely. Would I be > right in assuming there is something wrong with the second one that > moves so freely? If so, what could it be, how would I check it? > > -- > Best regards, > Bob mailto:[EMAIL PROTECTED] > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
