Chris, 48 mm chokes, 5.0 auxiliary venturis, 180 main jet, 180 air correctors, F9 emulsion tube, 60 F8 idle jets. These are the standard jettings for the carb and would be the best starting point. How much for the carb? I sold two brand new for $1000 last year.
Cheers Feral Errol -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Chris Simpson Sent: Monday, 3 June 2002 3:56 PM To: [EMAIL PROTECTED] Subject: Weber DCOE 55mm Hi all, I have the opportunity to pick up a 55mm DCOE weber and was wondering if any one has played around with beasts like this. THe motor that it will be running on is as follows L20 block, Z24 crank, Z22 oversized pistons making about 2.3L, 30/70 cam, balanced bottom end, about 10.3:1 comp, extractor and a 2.5" system. Any one got info as to what jets etc to use? Im looking for more bottom end to mid range power rather than flat out high revs. I assume that the larger carbs run all the same jets and all that as the smaller ones except for the chokes and the like. Match porting the carby to the manifold is a big area that will obviously need to be looked at. Thanks all Chris --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
