i had twin 50's, (50 DCO SP's not DCOE) hardest thing, was getting soft mounts for them had to be machined, as the only ones i could get where max 48mm
Heath ----- Original Message ----- From: Chris Simpson <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, June 03, 2002 3:55 PM Subject: Weber DCOE 55mm > > > Hi all, > > I have the opportunity to pick up a 55mm DCOE weber and was wondering if > any one has played around with beasts like this. THe motor that it will be > running on is as follows > > L20 block, Z24 crank, Z22 oversized pistons making about 2.3L, 30/70 cam, > balanced bottom end, about 10.3:1 comp, extractor and a 2.5" system. > > Any one got info as to what jets etc to use? Im looking for more bottom > end to mid range power rather than flat out high revs. I assume that the > larger carbs run all the same jets and all that as the smaller ones except > for the chokes and the like. > > Match porting the carby to the manifold is a big area that will obviously > need to be looked at. > > Thanks all > > Chris > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
