i had the exact same problem so what i did was just get some longer bolts, some break line, cut the breakline into 2 pieces about 1-2cms long and use them as spacers. worked fine.
or do what i did next, just get some webers :) >From: "Chris Simpson" <[EMAIL PROTECTED]> >Reply-To: [EMAIL PROTECTED] >To: [EMAIL PROTECTED] >Subject: SSS carby's >Date: Wed, 10 Jul 2002 16:58:09 GMT > > > >Ive bolted on what i think are general SSS twin SU style carby's but it >seems that the linkages dont line up! > >The linkage from the fire wall out to the carbs doesnt line up with the >throttle of the carbs. THe throttle of the carbs are about 6-8cm closer to >the block than the where the single Hitachi would be. > >Any one know what im on about here? >Are these indeed SSS carbs? or sre they something different? > >I would have thought that they would have lined up no worries to the std >linkage, but i was wrong > >Thanks > >Chris S > _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
