First, I blow all the areas to be sprayed with high pressure air, to clean
them and dislodge loose material.
I sprayed it into the front of the rear quarter panels, below the C pillar
from inside the boot.
Into the lower B pillars from the inside.
Into the sills from the inside of the car.
Upwards into the space between the inner and outer rear guards below the
boot floor, and downwards into the same area where the boot floor meets the
rear quarters.
Up and Down the plenum chamber drain in the centre of the engine bay.
Into the panel joins around the plenum chamber and the turret (roof)
gutters.
Along the lower door skins inside the doors.

This gets most of the potential rust spots except for the front guards These
need to be unbolted and cleaned for a good job.  When unbolted it may reveal
a need to treat the area above the top box section of the inner front
guards, where the outer guard bolts to it.  This area is a dirt trap and can
be quite rusty under the rubber seal, without showing it.

----- Original Message -----
From: "Chalmers, Ryan" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, 23 July 2002 10:37 AM
Subject: RE: Penetrol - where do you get it?


> where did you spray it ?? inbetween the rear quarters and boot? in the
sills under the dorrs etc and under the car ??
> Ryan
>
> Regards
> Ryan Chalmers
> Alarm Fault Manager
> Telstra INS
> Phone +61 2 8255 3365
> Fax +61 2 9235 3350
> Postal Locked Bag 6693 Sydney NSW 1100
> E-mail [EMAIL PROTECTED]
>
> > -----Original Message-----
> > From: Heath [SMTP:[EMAIL PROTECTED]]
> > Sent: Monday, July 22, 2002 10:12 PM
> > To: [EMAIL PROTECTED]
> > Subject: Re: Penetrol - where do you get it?
> >
> > for rust preventive in my dattoo, i used
> > 1/2 fish oil and 1/2 rust proof (brown waxxy shit) all made by septone,
> > i have been told by a few panel beaters that this is the best??
> > i mix them together and sprayed it with a degreaser gun. my car did
smell
> > for about 2 months.
> >
> > Heath
> > ----- Original Message -----
> > From: Richard Clough <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Monday, July 22, 2002 9:57 PM
> > Subject: Re: Penetrol - where do you get it?
> >
> >
> > > Not Penetrine, Mick, that's for loosening rusty threads.
> > >
> > > Penetrol is a rust treatment that works very well in hard to get at
spots
> > > stabilising the rust and leaving a very thin, shiny coating that stops
> > > further rust.  It comes in a pressure pack can, or in 4 litre and 20
litre
> > > tins.  4 litres cost $64 so if you only have a bit to do, go for the
spray
> > > pack.  I used 2 spray packs on a number of cars before I bought the 4
> > litre
> > > tin.
> > > ----- Original Message -----
> > > From: "mick ralph" <[EMAIL PROTECTED]>
> > > To: <[EMAIL PROTECTED]>
> > > Sent: Monday, 22 July 2002 10:20 AM
> > > Subject: Re: Penetrol - where do you get it?
> > >
> > >
> > > > Paul
> > > > Do u mean "penetrene"?
> > > > What exactly do u want to do with it?
> > > > Who makes it?
> > > > I've got good contacts for most things on the coast.
> > > > Email me if u like
> > > > cheers
> > > > Mick
> > > > ----- Original Message -----
> > > > From: "Paul Stanley" <[EMAIL PROTECTED]>
> > > > To: "OZDAT Mailing list" <[EMAIL PROTECTED]>
> > > > Sent: Monday, July 22, 2002 8:26 AM
> > > > Subject: Penetrol - where do you get it?
> > > >
> > > >
> > > > > I only get blank looks when I ask for Penetrol at paint shops and
auto
> > > > shops
> > > > >
> > > > > Anyone know where I can get it on the Gold Coast?
> > > > >
> > > > > Thanks
> > > > >
> > > > > From: Paul Stanley
> > > > >       [EMAIL PROTECTED]
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
>
>

--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to