What would kick ass would be an emulator, and the software to run it. So you can do real time or almost real time tuning on the Dyno then go home and burn an EPROM.
I reckon just wait a year or so. Who would have thought that you could get this type of sofware. Progress is cool. Nick > > From: "Ben" <[EMAIL PROTECTED]> > Subject: Re: nissan ecu editing software > Date: 25/07/2002 3:43:16 > To: <[EMAIL PROTECTED]> > > you cant do real time programming....just set everything up on yer > PC....burn the eprom, plus it in, and see how it goes....ya really need a > wideband EGO sensor to check what you have done is good....bit of a long > arsed way of tuning, but still cheaper than a aftermarket ECU > > > ----- Original Message ----- > From: "Paul Stanley" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, July 23, 2002 3:48 PM > Subject: Re: nissan ecu editing software > > > > Thanks for the link, it's worth a download it's probably worth big bucks! > > > > I didnt know the factory chips are soldered in. It makes sense, a chip > > socket will probably cause problems down the track... chip creep and > > corrosion being the major factors. If the chips are EPROM (electrically > > programmable read only memory) and cannot be erased (except with ultra > > violet light) how do you tune them? Is there some other memory to hold > > other variables? > > > > > > From: Paul Stanley > > [EMAIL PROTECTED] > > > > > > > > ----- Original Message ----- > > From: mark krawczuk <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Tuesday, July 23, 2002 11:48 AM > > Subject: nissan ecu editing software > > > > > > > hi, look since i`m t he funloving and generous guy that i am, i bought > of > > > ebay the nissan ecu editor kit. > > > the guy rekons is easy to put together, what a crock ....... > > > i got a peice of vero type board, crappy ic socket, not even a ZIF > > socket. > > > and a hand ful of other parts worth about 10 dollars, plus the > software. > > > i know a bit a bout electronics, but there is only the schematic , no > > > pics on where to place the parts on the board, i could follow the > > schematic, > > > but i really couldnt be stuffed. > > > > > > the supported ecu`s are: > > > > > > s14-sr20de(t) > > > 300zx vg30dett > > > s13/rs13-ca18det > > > ps13/rps13 sr20de(t) > > > r n n 14/u13 sr20de(t) > > > bcnr33/wgnc34 rb26dett > > > hcr32/a31/c33 rb20det > > > bnr32 rb26dett > > > ecr rb25det > > > the guy said he was gonna give me a link for the rb30 ecu but i havent > > got > > > it yet, that is what i really wanted it for. > > > the kit is a basic eprom progerammer. > > > but dick smith sella really good eprom programmer for 133 dollars, > does > > > any body know if this dick smith kit is suitable with the rom edit > > > software ? > > > or can u use any rom editing software with any eprom programmer.? > > > > > > the cd came with rom edit program, but i couldnt get it to run, (i > might > > > have been doing something wrong) > > > but i downloaded rom edit of the net , and that ran okay. > > > i asked before aboutsome software that was more user friendly, e.g, if > > you > > > wanted to increase injector opening , just click on that change it > and > > > that was that. the rom edit soft ware seems a bit to confusing, maybe i > > just > > > need to nut it out abit more. > > > > > > right , where was i ? thats right , funloving , generous guy , blah , > > > blah , blah okay, now if any body wants a copy of the NISSAN ECU > EDITING > > > SOFTWARE CD ( i will put the rom edit software i downloaded on > there > > > too) > > > i will send em a copy for free, if you email me a snail mail address to: > > > > > > [EMAIL PROTECTED] > > > > > > if you can help me out abit with using the software that would > grate.... > > > mark k > > > > > > > > > ----- Original Message ----- > > > From: "Paul Stanley" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Tuesday, July 23, 2002 9:27 AM > > > Subject: Re: software > > > > > > > > > > I'm hungry for software too... anything will do... even something > for > > > the > > > > computers in Astras/Pulsars and Camairas. I searched for it ages ago > > and > > > > all I got back from the company thats makes them was "sorry we cant > give > > > you > > > > that information" > > > > > > > > > > > > From: Paul Stanley > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > From: mark krawczuk <[EMAIL PROTECTED]> > > > > To: <[EMAIL PROTECTED]> > > > > Sent: Monday, July 22, 2002 11:47 PM > > > > Subject: Re: software > > > > > > > > > > > > thanks. > > > > > > > > ----- Original Message ----- > > > > From: Heath > > > > To: [EMAIL PROTECTED] > > > > Sent: Monday, July 22, 2002 8:50 PM > > > > Subject: Re: software > > > > > > > > > > > > yerr, but i have it on the work computer, > > > > i'll try and url you tomorrow. > > > > it's called romedit, i think, > > > > a guy down the Gold Coast has a site, about a Silvia, he has on his > > > site. > > > > > > > > Heath > > > > ----- Original Message ----- > > > > From: mark krawczuk > > > > To: [EMAIL PROTECTED] > > > > Sent: Monday, July 22, 2002 7:35 PM > > > > Subject: software > > > > > > > > > > > > hi, does anybody know where i can get/download any fairly user > > > > friendly software to program nissan ecu`s? > > > > > > > > email me privately : [EMAIL PROTECTED] > > > > > > > > > > > > mark k > > > > > > > > > --membersozdat------------------------------------------------------- > > > > OZDAT Mailing List Please Note:- > > > > Send (un)subscribe requests to [EMAIL PROTECTED] > > > > Send submissions to [EMAIL PROTECTED] > > > > No unauthorised redistribution of this email > > > > http://www.ozdat.com/ozdatonline/index.htm > > > > http://www.ozdat.com/ozdatonline/listindex.html > > > > http://www.mail-archive.com/[email protected]/ > > > > > --------------------------------------------------------------------- > > > > > > > > --membersozdat------------------------------------------------------- > > > > OZDAT Mailing List Please Note:- > > > > Send (un)subscribe requests to [EMAIL PROTECTED] > > > > Send submissions to [EMAIL PROTECTED] > > > > No unauthorised redistribution of this email > > > > http://www.ozdat.com/ozdatonline/index.htm > > > > http://www.ozdat.com/ozdatonline/listindex.html > > > > http://www.mail-archive.com/[email protected]/ > > > > --------------------------------------------------------------------- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > This message was sent through MyMail http://www.mymail.com.au --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
