hi, i know either electronics australia ( no longer published? ) or silicon chip , have produce a eprom emulator as a kit. still might be avail froma half decent electronics supplier. some things for example , on the dick smith web site , arent listed in the yearly catalog..
mark k ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, July 24, 2002 10:42 AM Subject: Re: nissan ecu editing software > What would kick ass would be an emulator, and the software to run it. > > So you can do real time or almost real time tuning on the Dyno then go home and burn an EPROM. > > I reckon just wait a year or so. Who would have thought that you could get this type of sofware. > Progress is cool. > > Nick > > > > From: "Ben" <[EMAIL PROTECTED]> > > Subject: Re: nissan ecu editing software > > Date: 25/07/2002 3:43:16 > > To: <[EMAIL PROTECTED]> > > > > you cant do real time programming....just set everything up on yer > > PC....burn the eprom, plus it in, and see how it goes....ya really need a > > wideband EGO sensor to check what you have done is good....bit of a long > > arsed way of tuning, but still cheaper than a aftermarket ECU > > > > > > ----- Original Message ----- > > From: "Paul Stanley" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Tuesday, July 23, 2002 3:48 PM > > Subject: Re: nissan ecu editing software > > > > > > > Thanks for the link, it's worth a download it's probably worth big bucks! > > > > > > I didnt know the factory chips are soldered in. It makes sense, a chip > > > socket will probably cause problems down the track... chip creep and > > > corrosion being the major factors. If the chips are EPROM (electrically > > > programmable read only memory) and cannot be erased (except with ultra > > > violet light) how do you tune them? Is there some other memory to hold > > > other variables? > > > > > > > > > From: Paul Stanley > > > [EMAIL PROTECTED] > > > > > > > > > > > > ----- Original Message ----- > > > From: mark krawczuk <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Tuesday, July 23, 2002 11:48 AM > > > Subject: nissan ecu editing software > > > > > > > > > > hi, look since i`m t he funloving and generous guy that i am, i bought > > of > > > > ebay the nissan ecu editor kit. > > > > the guy rekons is easy to put together, what a crock ....... > > > > i got a peice of vero type board, crappy ic socket, not even a ZIF > > > socket. > > > > and a hand ful of other parts worth about 10 dollars, plus the > > software. > > > > i know a bit a bout electronics, but there is only the schematic , no > > > > pics on where to place the parts on the board, i could follow the > > > schematic, > > > > but i really couldnt be stuffed. > > > > > > > > the supported ecu`s are: > > > > > > > > s14-sr20de(t) > > > > 300zx vg30dett > > > > s13/rs13-ca18det > > > > ps13/rps13 sr20de(t) > > > > r n n 14/u13 sr20de(t) > > > > bcnr33/wgnc34 rb26dett > > > > hcr32/a31/c33 rb20det > > > > bnr32 rb26dett > > > > ecr rb25det > > > > the guy said he was gonna give me a link for the rb30 ecu but i havent > > > got > > > > it yet, that is what i really wanted it for. > > > > the kit is a basic eprom progerammer. > > > > but dick smith sella really good eprom programmer for 133 dollars, > > does > > > > any body know if this dick smith kit is suitable with the rom edit > > > > software ? > > > > or can u use any rom editing software with any eprom programmer.? > > > > > > > > the cd came with rom edit program, but i couldnt get it to run, (i > > might > > > > have been doing something wrong) > > > > but i downloaded rom edit of the net , and that ran okay. > > > > i asked before aboutsome software that was more user friendly, e.g, if > > > you > > > > wanted to increase injector opening , just click on that change it > > and > > > > that was that. the rom edit soft ware seems a bit to confusing, maybe i > > > just > > > > need to nut it out abit more. > > > > > > > > right , where was i ? thats right , funloving , generous guy , blah , > > > > blah , blah okay, now if any body wants a copy of the NISSAN ECU > > EDITING > > > > SOFTWARE CD ( i will put the rom edit software i downloaded on > > there > > > > too) > > > > i will send em a copy for free, if you email me a snail mail address to: > > > > > > > > [EMAIL PROTECTED] > > > > > > > > if you can help me out abit with using the software that would > > grate.... > > > > mark k > > > > > > > > > > > > ----- Original Message ----- > > > > From: "Paul Stanley" <[EMAIL PROTECTED]> > > > > To: <[EMAIL PROTECTED]> > > > > Sent: Tuesday, July 23, 2002 9:27 AM > > > > Subject: Re: software > > > > > > > > > > > > > I'm hungry for software too... anything will do... even something > > for > > > > the > > > > > computers in Astras/Pulsars and Camairas. I searched for it ages ago > > > and > > > > > all I got back from the company thats makes them was "sorry we cant > > give > > > > you > > > > > that information" > > > > > > > > > > > > > > > From: Paul Stanley > > > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > From: mark krawczuk <[EMAIL PROTECTED]> > > > > > To: <[EMAIL PROTECTED]> > > > > > Sent: Monday, July 22, 2002 11:47 PM > > > > > Subject: Re: software > > > > > > > > > > > > > > > thanks. > > > > > > > > > > ----- Original Message ----- > > > > > From: Heath > > > > > To: [EMAIL PROTECTED] > > > > > Sent: Monday, July 22, 2002 8:50 PM > > > > > Subject: Re: software > > > > > > > > > > > > > > > yerr, but i have it on the work computer, > > > > > i'll try and url you tomorrow. > > > > > it's called romedit, i think, > > > > > a guy down the Gold Coast has a site, about a Silvia, he has on his > > > > site. > > > > > > > > > > Heath > > > > > ----- Original Message ----- > > > > > From: mark krawczuk > > > > > To: [EMAIL PROTECTED] > > > > > Sent: Monday, July 22, 2002 7:35 PM > > > > > Subject: software > > > > > > > > > > > > > > > hi, does anybody know where i can get/download any fairly user > > > > > friendly software to program nissan ecu`s? > > > > > > > > > > email me privately : [EMAIL PROTECTED] > > > > > > > > > > > > > > > mark k > > > > > > > > > > > --membersozdat------------------------------------------------------- > > > > > OZDAT Mailing List Please Note:- > > > > > Send (un)subscribe requests to [EMAIL PROTECTED] > > > > > Send submissions to [EMAIL PROTECTED] > > > > > No unauthorised redistribution of this email > > > > > http://www.ozdat.com/ozdatonline/index.htm > > > > > http://www.ozdat.com/ozdatonline/listindex.html > > > > > http://www.mail-archive.com/[email protected]/ > > > > > > --------------------------------------------------------------------- > > > > > > > > > > > --membersozdat------------------------------------------------------- > > > > > OZDAT Mailing List Please Note:- > > > > > Send (un)subscribe requests to [EMAIL PROTECTED] > > > > > Send submissions to [EMAIL PROTECTED] > > > > > No unauthorised redistribution of this email > > > > > http://www.ozdat.com/ozdatonline/index.htm > > > > > http://www.ozdat.com/ozdatonline/listindex.html > > > > > http://www.mail-archive.com/[email protected]/ > > > > > > --------------------------------------------------------------------- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > This message was sent through MyMail http://www.mymail.com.au > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
