The rear is very basic the front not to bad just bolt them in make sure the door is unlocked and it should all fall into place. If you doors are 100% bare it would pay to strip anther spare door to see whats what...(thats what I'm gonna do)
Malcolm "30+ spare doors later" ----- Original Message ----- From: Richard Webb <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, August 26, 2002 1:12 PM Subject: Re: door handles - how they work > Yeah I worked those out too, they have like a metal clip that like goes over > a little latch. Hard to explain. > ----- Original Message ----- > From: "maldat" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Sunday, August 25, 2002 9:51 AM > Subject: Re: door handles - how they work > > > > the rear door handles have no rods they just bolt in > > 510 front door handles are the same as 240,260,280Z (130models) > > Malcolm > > ----- Original Message ----- > > From: Richard Clough <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Sunday, August 25, 2002 11:01 PM > > Subject: Re: door handles - how they work > > > > > > > The handles connect to a threaded wire with a plastic nut on it, to > adjust > > > the lever throw. These wires may still be attached to the door catch > > > mechanisms, which they operate by the plastic nut pushing on a lever. > > > > > > The wires are attached to the door handles by pushing the bent right > > angles > > > through the captive plastic o rings in the door handle levers. > > > ----- Original Message ----- > > > From: "Richard Webb" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Thursday, 22 August 2002 12:38 PM > > > Subject: door handles - how they work > > > > > > > > > > Sorry about all the questions recently... but the pannel beater who > > > painted > > > > my car has taken the door handles off, I have absolutly no idea how > they > > > > work.... > > > > > > > > do the back ones just directly pull that metal thing insde which opens > > the > > > > door? or are they attached to something? > > > > > > > > and with the front there has to be a piece of wire going from the > handle > > > to > > > > the opening mechanism, doest there? what should I use like an old coat > > > > hanger? > > > > > > > > anyway any help would be appreciated! > > > > > > > > Richard > > > > > > > > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
