i had to change my cog over....you can see what i did at www.tassie.net.au/~djcooper/
under the sr transplant section ----- Original Message ----- From: "Terry Rudd" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, August 27, 2002 4:02 PM Subject: RE: SR20 speedo drive... > Andrew, > > There is a known good/better speedo drive to use in the SR gearbox, from > memory I think it's from a S3 Bluebird CA20. I'll drop in on the SR > Transplant guys and ask to find out for you. > > regards > Terry > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Andrew > Greenbury > Sent: Tuesday, 27 August 2002 11:13 AM > To: [EMAIL PROTECTED] > Subject: SR20 speedo drive... > > > Hi list, > > Did gearbox speedo drives come in different diameters? > > Got a friend installing an SR, and he's been told to replace the > electronic speedo sender with one of the 'normal' speedo drives in > order to connect to the standard 1600 speedo cable. > > But he reckons a white cog alloy carrier type wont fit, and > measures 30mm in diameter, while a 28mm dia speedo drive is > required??! > > Has anyone come across this??! > > Thanks to anyone who can shed some light on this, > Andrew > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
