heh, thanx....that was the idea of it....the thing geordie wrote helped me out a heap....so i thought i would just fill in the gaps
----- Original Message ----- From: "Terry Rudd" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, August 27, 2002 8:39 PM Subject: RE: SR20 speedo drive... > Ben, > > I seem to recall the SR's talking about this - looks like there must be two > types of SR gearbox, cause the only SR that I've had anything to do with > worked the same a Geordie's but ours didn't leak. > > That are real nice blow by blow transplant web article you've done there - > well done, a SOB like me can even follow that. > > regards > Terry > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Ben C > Sent: Tuesday, 27 August 2002 6:47 PM > To: [EMAIL PROTECTED] > Subject: Re: SR20 speedo drive... > > > i had to change my cog over....you can see what i did at > > www.tassie.net.au/~djcooper/ > > under the sr transplant section > > ----- Original Message ----- > From: "Terry Rudd" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, August 27, 2002 4:02 PM > Subject: RE: SR20 speedo drive... > > > > Andrew, > > > > There is a known good/better speedo drive to use in the SR gearbox, from > > memory I think it's from a S3 Bluebird CA20. I'll drop in on the SR > > Transplant guys and ask to find out for you. > > > > regards > > Terry > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]]On Behalf Of Andrew > > Greenbury > > Sent: Tuesday, 27 August 2002 11:13 AM > > To: [EMAIL PROTECTED] > > Subject: SR20 speedo drive... > > > > > > Hi list, > > > > Did gearbox speedo drives come in different diameters? > > > > Got a friend installing an SR, and he's been told to replace the > > electronic speedo sender with one of the 'normal' speedo drives in > > order to connect to the standard 1600 speedo cable. > > > > But he reckons a white cog alloy carrier type wont fit, and > > measures 30mm in diameter, while a 28mm dia speedo drive is > > required??! > > > > Has anyone come across this??! > > > > Thanks to anyone who can shed some light on this, > > Andrew > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
