1-starts first crank 2-dont need it to warm up before u get 'power' 3-smoothness factor 4-economy 5-a 40% increase in power over my twin webers 6-cost the same amount roughly as a set of webers anyhow 7-the list goes on......
>From: "Dominic Votano" <[EMAIL PROTECTED]> >Reply-To: [EMAIL PROTECTED] >To: <[EMAIL PROTECTED]> >Subject: Re: Fj20et Throttle bodies??? >Date: Tue, 27 Aug 2002 16:50:15 +1000 > >What is the advantage of this set up over twin webers? > >Dom > >----- Original Message ----- >From: "Ryan Ottens" <[EMAIL PROTECTED]> >To: <[EMAIL PROTECTED]> >Sent: Tuesday, August 27, 2002 4:23 PM >Subject: Re: Fj20et Throttle bodies??? > > > > the vn-vx commie throttle body is 65mm. > > this is what i used on my l20b efi setup....dunno if will 'bolt' onto >the >fj > > plenum tho. > > u can get them for like $30 form wreckors tho! > > > > ryan > > > > > > >From: "Leighton Wolfe" <[EMAIL PROTECTED]> > > >Reply-To: [EMAIL PROTECTED] > > >To: <[EMAIL PROTECTED]> > > >Subject: Re: Fj20et Throttle bodies??? > > >Date: Tue, 27 Aug 2002 11:57:31 +1000 > > > > > >apparently the SR20 throttle bodies bolt straight on > > > > > >what is you thoughts on that david????????? > > > > > > > > > > > > > > >thanx > > > > > >Leighton > > >----- Original Message ----- > > >From: "David Hirst" <[EMAIL PROTECTED]> > > >To: <[EMAIL PROTECTED]> > > >Sent: Tuesday, August 27, 2002 9:39 AM > > >Subject: RE: Fj20et Throttle bodies??? > > > > > > > > > > The falcon TB (xf ) are a fair bit bigger than the std FJ one's. > > > > I'm using a V8 Commodore TB on my FJ that's also 65mm. > > > > >From memory the FJ's TB has a 55mm butterfly and a 60-65 mm opening > > >where > > > > the > > > > Falcon has a 65mm butterfly > > > > My FJ's now making over 400 hp with the setup I have and the >Commodore > > >TB > > > > seems to be doing the job fine > > > > > > > > Cheers > > > > Dave > > > > > > > > > ---------- > > > > > From: Terry Rudd > > > > > Reply To: [EMAIL PROTECTED] > > > > > Sent: Monday, 26 August 2002 5:30 PM > > > > > To: [EMAIL PROTECTED] > > > > > Subject: RE: Fj20et Throttle bodies??? > > > > > > > > > > I'm curious about this now - I wonder if Anthony is out there, I'm > > > > > thinking > > > > > that with over 300hp out the rear his FJ must have whatever TB >does > > >the > > > > > business on it. > > > > > > > > > > regards > > > > > Terry > > > > > > > > > > -----Original Message----- > > > > > From: [EMAIL PROTECTED] > > > > > [mailto:[EMAIL PROTECTED]]On Behalf Of Leighton > > >Wolfe > > > > > Sent: Monday, 26 August 2002 7:14 PM > > > > > To: [EMAIL PROTECTED] > > > > > Subject: Re: Fj20et Throttle bodies??? > > > > > > > > > > > > > > > nope there a number of people that use the 65 mm throttlebody and >the > > > > > falcon > > > > > ones are definatley bigger > > > > > > > > > > I have seen them > > > > > thanx > > > > > > > > > > Leighton > > > > > ----- Original Message ----- > > > > > From: "Terry Rudd" <[EMAIL PROTECTED]> > > > > > To: <[EMAIL PROTECTED]> > > > > > Sent: Monday, August 26, 2002 3:37 PM > > > > > Subject: RE: Fj20et Throttle bodies??? > > > > > > > > > > > > > > > > Correct as in at the butterfly - I wasn't dreaming then (-: so > > >what's > > > > > the > > > > > > deal on the Ford ones - are we sure they're talking turbo FJ, >the >NA > > >FJ > > > > > TB > > > > > > is tiny compared to the turbo version. > > > > > > > > > > > > regards > > > > > > Terry > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > From: [EMAIL PROTECTED] > > > > > > [mailto:[EMAIL PROTECTED]]On Behalf Of >Leighton > > >Wolfe > > > > > > Sent: Monday, 26 August 2002 3:04 PM > > > > > > To: [EMAIL PROTECTED] > > > > > > Subject: Re: Fj20et Throttle bodies??? > > > > > > > > > > > > > > > > > > i just measured mine and mine is stock and the Internal diametre >of > > >the > > > > > in > > > > > > take hole the throat of the throttle body is approx 70mmm but >it > > > > > tapers > > > > > > in towards the butterlfy mechanism??? > > > > > > > > > > > > so am i to take it that the 65 mm is measured at the butterfly > > > > > opening??? > > > > > > > > > > > > > > > > > > thanx > > > > > > > > > > > > > > > > > > Leighton > > > > > > ----- Original Message ----- > > > > > > From: "dceptn" <[EMAIL PROTECTED]> > > > > > > To: <[EMAIL PROTECTED]> > > > > > > Sent: Monday, August 26, 2002 2:40 PM > > > > > > Subject: Re: Fj20et Throttle bodies??? > > > > > > > > > > > > > > > > > > > What size throttle bodies do typical hypo-worked FJ20s have? > > >(perhpas > > > > > in > > > > > > > excess of 500 engine HP) > > > > > > > i recently bought a custom plenum, which incorporated in it a >84mm > > >VS > > > > > V8 > > > > > > > holden TB. > > > > > > > ----- Original Message ----- > > > > > > > From: "Terry Rudd" <[EMAIL PROTECTED]> > > > > > > > To: <[EMAIL PROTECTED]> > > > > > > > Sent: Monday, August 26, 2002 4:18 PM > > > > > > > Subject: RE: Fj20et Throttle bodies??? > > > > > > > > > > > > > > > > > > > > > > May be mine isn't the original - looks like it's stock >though. > > >How > > > > > big > > > > > > is > > > > > > > > the TB on yours? There's a lot of things not stock on mine >but > > >the > > > > > TB > > > > > > > wasn't > > > > > > > > something that I was aware of, and there's not a lot of >factory > > >data > > > > > > about > > > > > > > > on the FJt engine to know for sure. > > > > > > > > > > > > > > > > regards > > > > > > > > Terry (lookin' like I could be wrong about this issue) > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > From: [EMAIL PROTECTED] > > > > > > > > [mailto:[EMAIL PROTECTED]]On Behalf Of > > >Leighton > > > > > Wolfe > > > > > > > > Sent: Monday, 26 August 2002 1:45 PM > > > > > > > > To: [EMAIL PROTECTED] > > > > > > > > Subject: Re: Fj20et Throttle bodies??? > > > > > > > > > > > > > > > > > > > > > > > > in the latest zoom there is an FJ20 in a gemini putting out > > >430kw > > > > > at > > > > > > the > > > > > > > > wheels and it has as one of the noteable mods a 65mm >throttle > > > > > body???? > > > > > > > > > > > > > > > > > > > > > > > > thanx > > > > > > > > > > > > > > > > leighton > > > > > > > > ----- Original Message ----- > > > > > > > > From: "Terry Rudd" <[EMAIL PROTECTED]> > > > > > > > > To: <[EMAIL PROTECTED]> > > > > > > > > Sent: Monday, August 26, 2002 12:11 PM > > > > > > > > Subject: RE: Fj20et Throttle bodies??? > > > > > > > > > > > > > > > > > > > > > > > > > What Tim said, and in any case the stock Nissan TB on a >FJT >is > > > > > 65mm > > > > > > OEM. > > > > > > > A > > > > > > > > > 65mm TB flows a huge amount of air as in FM, I can't >remember > > >how > > > > > much > > > > > > > but > > > > > > > > > it is huge. > > > > > > > > > > > > > > > > > > regards > > > > > > > > > Terry > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > From: [EMAIL PROTECTED] > > > > > > > > > [mailto:[EMAIL PROTECTED]]On Behalf Of >Tim > > > > > Heibloem > > > > > > > > > Sent: Monday, 26 August 2002 10:34 AM > > > > > > > > > To: [EMAIL PROTECTED] > > > > > > > > > Subject: Re: Fj20et Throttle bodies??? > > > > > > > > > > > > > > > > > > > > > > > > > > > hows it going? > > > > > > > > > > > > > > > > > > > > > > > > > > > i am getting this done to my intake manifold at the moment >and > > >i > > > > > will > > > > > > > show > > > > > > > > u > > > > > > > > > some pics once its done.. > > > > > > > > > > > > > > > > > > > > > > > > > > > im getting a wedge cut done and moving the TB more towards >the > > > > > left > > > > > to > > > > > > > > > ensure better flow from the intercooler > > > > > > > > > > > > > > > > > > > > > > > > > > > the XF falcom TB will fit if u drilled out the holes a bit >but > > > > > would > > > > > > be > > > > > > > a > > > > > > > > > waste as the flanges are different > > > > > > > > > > > > > > > > > > > > > > > > > > > tim > > > > > > > > > > > > > > > > > > > > >_________________________________________________________________ > > > > > > > > > Chat with friends online, try MSN Messenger: > > > > > http://messenger.msn.com > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _________________________________________________________________ > > Send and receive Hotmail on your mobile device: http://mobile.msn.com > > > > > > > > _________________________________________________________________ Join the world�s largest e-mail service with MSN Hotmail. http://www.hotmail.com --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
