Andrew, Here are the colours of ZL gearbox speedo drives - both 5x or 6x drives are the same colour.
16 Yellow 17 Black 18 Blue 19 White 20 Red 21 Purple 22 Pink 23 Not on my list - anyone know? There are two sleeve assemblies - for 16t-19t pinions, and 20t-23t. When you fit a red drive to a 16-19t holder you run into the problem of the slot not lining up on the extension housing and there are two ways out 1) as the holders are offset, you can rotate the holder until it meshes and reslot which is the usual way or 2) fit the extension housing off the vehicle that has the other holder as standard. regards Terry -----Original Message----- From: [EMAIL PROTECTED] [mailto:membersozdat_owner@;datascribe.com.au]On Behalf Of Andrew Greenbury Sent: Monday, 4 November 2002 11:19 AM To: [EMAIL PROTECTED] Subject: Re: speedo drive...` Hi Mark, Ive got a C210 skyline box in with a standard diff and 196/50R15 tyres, and I required a pink/red speedo drive for my speedo to be accurate (cant remember how many teeth). An alloy body speedo drive was required. Apparently this is relatively the same box as the 240K, so maybe you have a steel body speedo drive at the moment? A grey/black cog was originally in my box, and there was no way my new drive wanted to go in which made me think I also had something wrong. On comparision with the original, it appeared that the pink cog being bigger wouldnt fit in the meshing space that the grey cog did. But when put in rotated 180 degrees (so the slot is at the bottom rather than the top) it did mesh nicely. So I just used a hacksaw to make a new slot for the fixing tab. Perhaps you are finding this issue also? As for which colour cog you require sorry I dont know. Hope it helps Andrew > Hi, > > I have been trying to find a speedo drive to suit my 240K 5 speed > for a while now, i have even pulled a drive straight out of a 240K > and it doesn't work in my car - the drive isn't long enough to > mesh with the speedo gear inside the gearbox. I think the g/box i > pulled it out of must have been a 240K 4-speed (i didnt think to > check at the time..) Do the 240K 4 and 5 speed boxes have different > speedo drives?? If they do then i must just have a 4-speed one... > > Also, while i'm trying to find a speedo drive that works, is there > a certain type (colour, what car? etc) that would give me any sort > of an accurate speedo? It's a 1600 with a 3.9 diff, and > 195/60R14's. > > At the moment i dont care if the speedo isn't accurate - as long > as i have one! I have been crawling along at what i think is 50 or > 60 or whatever, but any bet i have a couple of speeding fines in > the mail soon! > > Thanks, > Mark > > _____________________________________________________________ > Get Your free Ozdat Email Account > ---> http://www.ozdat.com > > _____________________________________________________________ > Select your own custom email address for FREE! Get [EMAIL PROTECTED] w/No Ads, 6MB, POP & more! http://www.everyone.net/selectmail?campaign=tag > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@;datascribe.com.au/ ---------------------------------------------------------------------
