hi, ohhh boy here i go again.
you need a nissan navara 2.4 crank, get the counter weights ground down to 200b engin (2ltr size) mains and conrods are same as z series,l series. you need 2.00ltr conrods, z series pistons. to suit. notch the bottom of cylinder bores. and where the oil gallery runs inside the block to the front of engine u need to grind abit away on that as well for clearance. anything else: email me: [EMAIL PROTECTED] mark k ----- Original Message ----- From: "Weapon510" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, September 10, 2003 5:20 PM Subject: How do i build a 2.4L L series > hey list > > i want to build a 2.4 Litre L series for my 1600.. > > what do i need to build one.. and the specs that i need like bore, > piston height etc.... > > any help would be great... i want something different for my datto.. > > > cheers johnty > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
