If it runs nice it must be sweet. When datsun l engines run clean at tlow revs they run lean up top end and then the pistions get holes in them.. malcolm ----- Original Message ----- From: "Jeff Oldham" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, September 19, 2003 10:30 AM Subject: RE: URGENT... L20B timing???
> Mate, mine is really advanced,(L16) 12-15 deg, dont know if this is a > problem > maybe it can damage the engine if too advanced ? > bear in mind that i am running twin su's with electric fuel pump with very > rich mix. > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of maldat > Sent: Thursday, 18 September 2003 8:59 PM > To: [EMAIL PROTECTED] > Subject: Re: URGENT... L20B timing??? > > > > Depends on,,,,all sorts of things. > > But best bet is to "drive In tune" as you go Sure means lots of stops and > starts but very much worth it. > > it takes(took) me all day to tune a 510 when the owner waints max out put > ... > > By ear is the best bet much better than any scope (I'm gonna get shit from > deaf people about this). > > Why dont you play with your car your self??? its not hard wheres the > computer?????it ant got one.. > > Buy a couple of books,,and a couple of spanners.. > > if the car is running,,or if its not start here... > > Lossen of the dizzy bolts a wee tad so you can move the dizzy by hand,,get > someone to wind it over on the key,as you move the dizzy around by hand > slowly till the car fires ,then get your mate to bring up the revs a tad to > say 1000Rpm then move the dizzy left to where the pitch changes,then move it > back the other way till it goes the other way(by ear) then put back in the > middle,,go for a drive,,,,,maybe advance a tad ,, > > got the idea ?? > > its not hard and that why this is a reallly cool list.. > > Malcolm > > ----- Original Message ----- > From: "Stuey Roberts" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, September 18, 2003 10:15 PM > Subject: URGENT... L20B timing??? > > > > Hey listers, im taking my 1600 with a mildly worked l20b up to redcliffe > for > > ian stewart to have a play with my carbies, and i was wanting to know what > > L20's timing is supposed to be, i had heard 8deg, but was talking to > cameron > > earlier and he thinks 12-15 deg?? Can anybody help me?? thanks, stuey > > > > _________________________________________________________________ > > E-mail just got a whole lot better. New ninemsn Premium. Click here > > http://ninemsn.com.au/premium/landing.asp > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
