A useful bit of info. Cheers, Rob P ----- Original Message ----- From: "andrew smith" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, October 24, 2003 4:00 PM Subject: tie rod ends
> I thought i would warn people that have extended lower control arms that > the tie rods ends that they are starting to sell are around 12mm storter > than they should be which means even less thread holding them on when > the control arms are lengthened.I was rebuilding the front end and > thought i would change the ball joints and tie rod ends while i did the > brakes.I ordered in 2 tie rod ends (TE437L&R) and when they tuned up one > was the right length and the other the new shorter type.It seems that > they are not making them for the 1600 anymore so they have substituted > something else into that part number.They ended up sending down every > brand they had but they were all the short variety.I had to ring around > everywhere and eventually found someone that had old stock with the long > ones. > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
