Chris,

This question has been raised before so I checked my archives and found a
post from Fergy. The Soobie lock fit as he has them in his 1600, straight
bolt on. It may do the job for you if they still have them in stock.

regards
Terry

I have found a source for both the early and late
model (32mm and 38mm dia column's) ignition switches
complete and door locks.

These are new locks and available from "Waterloo
Wreckers" here in the ACT (well Queanbeyan NSW
actually). The phone number is (02) 6297 6329, and
cost $80 ea for the ignition locks, door locks I don't
know at this stage. Peter is the bloke I saw and he
was very helpful.

If you are able to get hold of a 240K Ign Switch, I
believe they fit the larger dia column as do Subaru
Brumby and early 4 WD sedans.

I don't know of any other "suitable donor car" for the
smaller dia set. If I discover which one would be
suitable I will let you know.

That's all folks

Bruce

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Chris king
Sent: Monday, 22 December 2003 1:05 PM
To: [EMAIL PROTECTED]
Subject: IMPORTANT ignition key barrel


Hey there guys

Im doing my rego and got pulled up for the key being able to be removed
whilst in the ignition position.

ive got a 69 1600 without steering lock.

i went up to the local nissan dealer and found there is no 1600 ones in
australia.
The 1200 ones look similar are they and are the lugs on the back the same???

also is it possible to convert to one with a steering lock?

Thanks for your help

its due by 23rd so getting a bit desperate

Chris  King

ps

hate rego round this time!!!!!!!!!!







--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[EMAIL PROTECTED]/
---------------------------------------------------------------------

Reply via email to