You slot the inner pivot point of the trailing arm pickups on the cross member vertically, to allow the wheels to stand up, then lock them at that setting. Normally not a mod you do on a rally car as it shouldn't sit that low, unless you are "tarmac rally" guys.
There are plenty of other rally mods basically around suspension and brakes and of course body strengthening by seam welding. Read the Ozdat archives for starters, it has a wealth of info on the suspension and brake upgrades. Big Dollars to Spend? Peter Davis is the man to speak to for a specialised rally built suspension strut. Or talk to Errol on this list. Check out his web site - "Datrats" ----- Original Message ----- From: "Troy Mahony" <[EMAIL PROTECTED]> To: "OZ Dat Mailing List" <[EMAIL PROTECTED]> Sent: Wednesday, 7 January 2004 16:07 PM Subject: 1600 rear end mods > Afternoon All > > A friend made reference to a mod that some 1600 owners do to square up the > rear wheels. The rear tyres tend to angle in at the top on our Rally spec > 1600. Not sure if such a mod exists?? > > Also if any other members have any other Rally mods they can share they > would be welcomed. > > Regards > > Troy Mahony > > Country Wide Insurance Brokers > Phone (08) 9791 1786 > Fax No (08) 9791 1723 > Mobile 0428988896 > Email [EMAIL PROTECTED] > Website www.cwib.com.au > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
