No they're actually momo's they are quite an old design kinda star like five spoke with a deep dish. got them 2nd hand freshly powder coated, ive got a couple of pics if you want a look.
the performance 16x7 are 12 mm offset, would give more clearance issues. although I think mark k got them to fit. cheers Chris actually Andrew I wanted to ask you about your wideband sensor. What kind is it? do you just have the sensor and are looking to get the controller? ----- Original Message ----- From: "Andrew Greenbury" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, April 08, 2004 11:08 AM Subject: Re: Large Rims 16" or 17" on 1600 > Hi Chris, > > 16x7 Performance Superlites? > > Andrew > > > Justin > > > > I just fitted a set of 16x7 a week ago. With 205/45/16 yoki 359's. > > > > I originally had 13x6's on it. I found the 13x6's with 205 rubber was a bit > > sloppy (rubber to wide for the wheels) > > > > I have absolutely no clearance issues with 240k struts and extended control > > arms. > > > > The wheels are 25mm offset. There is about 8mm clearance between the tyre > > and strut and there seems to be plenty on the guards as well. > > I think my guards are rolled. you wouldn't want to go wider than a 205 tyre. > > > > I has expecting the ride to be much firmer however there wasn't all that > > much difference. Maybe due to the fact I was running higher tyre pressures > > in the 13's. > > > > Hope a bit of this helps. > > > > Chris King > > ----- Original Message ----- > > From: "Justin Kinchington" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Wednesday, April 07, 2004 10:04 AM > > Subject: Large Rims 16" or 17" on 1600 > > > > > > > Hi Guys, > > > > > > Can anyone advise me on what the drive is like in a 1600 with 16" or 17" > > > mags fitted. Is the bump steer any worse or better, what width mags they > > > went with 6", 6.5", 7" etc, was there any inner guard scrub, what size > > tyre > > > you went with. Etc... I want to go bigger but don't want to spend money > > to > > > find out they don't fit. > > > > > > Thanks, > > > > > > > > > > > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
