Hi there,
thanks for the info but my car has leaf spring type suspension.is it possible to get a
set of crown wheel and pinion of 4.5 or 4.7 etc.
mohit.
-----Original Message-----
From: rclough [mailto:[EMAIL PROTECTED]
Sent: Wednesday, September 08, 2004 9:50 PM
To: [EMAIL PROTECTED]
Subject: Re: diff ratio...
Mohit
A bit more explanation. These diffs (720 and Navara 4WD utes), including
their housings, bolt straight into your Datsun rear cross member. Depending
on the age of the vehicle you get the diff from, you may have to swap the
drive shaft yokes on each side of the diff housing - by fitting your old
Datsun driveshaft yokes into the new diff housing , or adapting 1600
driveshafts to the new diff's output shaft yokes.
Most of the front diffs from these vehicles have limited slip centres as
standard - another reason to get one.
----- Original Message -----
From: "rclough" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, September 08, 2004 4:52 PM
Subject: Re: diff ratio...
> Mohit
> The front diff out of a Nissan 720 four wheel drive utility will be what
you
> want. (if you have these in Fiji. In the petrol model, I think they are
> 4.6 ratio, in diesel 5.1 ratio. These diffs are R180's (bigger) so they
bolt
> in, but take more power.
> ----- Original Message -----
> From: "Mohit K. Autar" <[EMAIL PROTECTED]>
> To: "Membersozdat (E-mail)" <[EMAIL PROTECTED]>
> Sent: Wednesday, September 08, 2004 6:59 AM
> Subject: diff ratio...
>
>
>
>
> Hi list,
>
> I have a datsun 1400 and im after 4.3 0r 4.5 diff ratio.i have 4.1 now on
> the car.if anyone has a idea where can i find one pliz let me know asap.
>
> mohit.
>
>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[EMAIL PROTECTED]/
---------------------------------------------------------------------
This email and any files transmitted with it are confidential and intended solely for
the use of the individual or entity to whom they are addressed. If you have received
this mail in error, please notify the System Administrator. Please note that any views
or opinions presented in this mail are solely those of the author and do not
necessarily
represent those of the Institute. Finally the recipient should check this mail and any
attachment for the presence of viruses. FIT has a virus detection in place and makes
every reasonable effort to ensure that this message is free from viruses. FIT accepts
no liability for any damage caused by any virus transmitted by this mail
