On Wed, Dec 2, 2009 at 9:40 AM, Binish Abraham <[email protected]> wrote:
> I solved the issue. > By default there is one port which connects master and slave. > If we need to specify the port it need to be set as follows > master > memcached -u root -m 48 -d -l node1 -p 12000 -X 14000 > > slave > memcached -u root -m 48 -l node2 -p 12001 -x node1 -X 4000 > > On Mon, Nov 23, 2009 at 5:52 PM, Bini <[email protected]> wrote: > >> Hi, >> I tried to use the following commands to start memcached with >> replication >> master >> memcached -u root -m 48 -d -l node1 -p 12000 >> slave >> memcached -u root -m 48 -l node2 -p 12001 -x node1 -X 12000 >> >> I was able to set and get values from node1 but no replica is found in >> node2. >> Not port is open in node2(12000 or 12001) >> details from node2 before killing of the process in node1 >> netstat -nap | grep memcached >> tcp 0 0 node2:32843 node1:12000 ESTABLISHED >> 27747/memcached >> unix 3 [ ] STREAM CONNECTED 40689 27747/ >> memcached >> unix 3 [ ] STREAM CONNECTED 40688 27747/ >> memcached >> [r...@node2 ~]# netstat -nap | grep 1200 >> tcp 0 0 node2:32843 node1:12000 ESTABLISHED >> 27747/memcached >> After killing the process in node1 the details are as follows >> [r...@node2 ~]# netstat -nap | grep memcached >> tcp 0 node2:12000 0.0.0.0:* >> LISTEN 27747/memcached >> tcp 0 0 node2:12001 0.0.0.0:* >> LISTEN 27747/memcached >> udp 0 0 node2:11211 >> 0.0.0.0:* 27747/memcached >> unix 3 [ ] STREAM CONNECTED 40689 27747/ >> memcached >> unix 3 [ ] STREAM CONNECTED 40688 27747/ >> memcached >> >> [r...@node2 ~]# netstat -nap | grep 1200 >> tcp 0 0 node2:12000 0.0.0.0:* >> LISTEN 27747/memcached >> tcp 0 0 node2:12001 0.0.0.0:* >> LISTEN 27747/memcached >> >> but the keys set in node1 are not available in node2 >> Thanks in advance >> > >
