On Wed, Dec 2, 2009 at 9:40 AM, Binish Abraham <[email protected]> wrote:
> > > On Wed, Dec 2, 2009 at 9:40 AM, Binish Abraham <[email protected]>wrote: > >> I solved the issue. >> By default there is one port which connects master and slave. >> If we need to specify the port it need to be set as follows >> master >> memcached -u root -m 48 -d -l node1 -p 12000 -X 14000 >> >> slave >> memcached -u root -m 48 -l node2 -p 12001 -x node1 -X 14000 >> >> On Mon, Nov 23, 2009 at 5:52 PM, Bini <[email protected]> wrote: >> >>> Hi, >>> I tried to use the following commands to start memcached with >>> replication >>> master >>> memcached -u root -m 48 -d -l node1 -p 12000 >>> slave >>> memcached -u root -m 48 -l node2 -p 12001 -x node1 -X 12000 >>> >>> I was able to set and get values from node1 but no replica is found in >>> node2. >>> Not port is open in node2(12000 or 12001) >>> details from node2 before killing of the process in node1 >>> netstat -nap | grep memcached >>> tcp 0 0 node2:32843 node1:12000 ESTABLISHED >>> 27747/memcached >>> unix 3 [ ] STREAM CONNECTED 40689 27747/ >>> memcached >>> unix 3 [ ] STREAM CONNECTED 40688 27747/ >>> memcached >>> [r...@node2 ~]# netstat -nap | grep 1200 >>> tcp 0 0 node2:32843 node1:12000 ESTABLISHED >>> 27747/memcached >>> After killing the process in node1 the details are as follows >>> [r...@node2 ~]# netstat -nap | grep memcached >>> tcp 0 node2:12000 0.0.0.0:* >>> LISTEN 27747/memcached >>> tcp 0 0 node2:12001 0.0.0.0:* >>> LISTEN 27747/memcached >>> udp 0 0 node2:11211 >>> 0.0.0.0:* 27747/memcached >>> unix 3 [ ] STREAM CONNECTED 40689 27747/ >>> memcached >>> unix 3 [ ] STREAM CONNECTED 40688 27747/ >>> memcached >>> >>> [r...@node2 ~]# netstat -nap | grep 1200 >>> tcp 0 0 node2:12000 0.0.0.0:* >>> LISTEN 27747/memcached >>> tcp 0 0 node2:12001 0.0.0.0:* >>> LISTEN 27747/memcached >>> >>> but the keys set in node1 are not available in node2 >>> Thanks in advance >>> >> >> >
