On Thu, 08 Oct 2009 00:55:55 -0400 Allan Streib <str...@cs.indiana.edu> wrote:
> LWB250 <lwb...@yahoo.com> writes: > > > The big issue is the large solder joints between the bottom board and > > the side boards. Reflow these joints with a decently sized soldering > > iron, as they will have microscopic cracks in them that are nearly > > impossible to see. These are the cause of the majority of the grief > > you have with this setup, at least in my experience. > > Do I need to add any fresh solder, or just melt the existing solder > joints? I have one of those "desoldering" irons, with a suction bulb, > if I need to remove the old solder and resolder with fresh (hoping not). Always add flux when remelting solder. Craig _______________________________________ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com