I've never replaced one is a 123, but have in 107, 115, and 124. They
were all dirt simple -
Clean dirt off to find nuts and bolt heads.
Loosen bolts and nuts holding mount to bracket and tranny.
Support tranny with floor jack and 2X4 longer than the tranny is wide.
Remove bracket with loosely held mount.
Remove old mount.
Clean dirt out of bracket.
Attach new mount lossely to bracket.
Install bracket and mount. tighten bolts and nuts.
Remove jack and 2X4.
Check bolts nd nuts.
Done.

On 11/26/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> Howdy -
> I just rec'd my new transmission mount from Rusty and looked thru the
> workshop manual without success for some instructions about installing it.
> I suspect it'll be dirt simple but always like to see what the experts say
> before jumping in.
>
> Does anyone know the appropriate job #  of the Installation Instructions?
> It's for a '78 240D 123.123.12.050680.
>
> Sincerely,
> Larry T ('74 911, '67 MGB, 78 240D)
> A Blood Test for your oil - www.youroil.net
> For Test Results http://members.rennlist.com/oil
> Weber Carb Stuff http://members.rennlist.com/webercarbs
> http://members.rennlist.com/my_911/Index.htm For my Paint Job Info
>
>
>
> _______________________________________
> For new parts see official list sponsor: http://www.buymbparts.com/
> For used parts email [EMAIL PROTECTED]
>
> To Unsubscribe or change delivery options go to:
> http://striplin.net/mailman/listinfo/mercedes_striplin.net
>


--
OK Don, KD5NRO
Norman, OK
'90 300D, '87 300SDL,  '81 240D,  '78 450SLC
The FSM created the Diesel Benz
http://www.venganza.org/

Reply via email to