I'd just get a Stihl. They just work.
On Mon, Aug 5, 2013 at 5:23 PM, Kaleb C. Striplin <ka...@striplin.net>wrote: > This thing has to be vapor locking. It starts when cold somewhat ok, it > died a couple of times today and I got it started, the last time it acted > like it was going to start and it would not. Let it sit about 30 min tried > it again, acted like it was going to start and then just would not. It's > about 100 outside if that matters. So it's full of fuel, I seem to get some > pressure when I open the cap. When I pump the primer it is completely dry > when turned on its side with the fuel cap up and removed. Filter is emerged > in fuel. I turned it back right side up and I get a little bit of fuel in > the primer bulb and pump the crap out of it. Afterwards it tried to start > once then would not. It seems like the fuel is vapor locking maybe because > it is so hot outside and this is a big ass tree I am cutting up? Got about > 3 cuts thru the huge bottom part of the tree today. Think is maybe 1.5-2 > feet in diameter I guess. I really need a bigger saw for this part of the > job but when it's running it seems to tear thru it just fine. I guess I > need to either try to adjust the carb or try some 100% gas I don't know. > > Sent from my iPhone > _______________________________________ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
