How about some photos and maybe measurements?
Randy
On 14/11/2013 6:08 AM, Richard Hattaway wrote:
I made a tool for the `123 chassis. It might work on a 126. it was cut from
3/4 plate with one of those fancy wire machines, then welded together.
It's available to anybody who wants it. It's heavy ( no chit ) and requres a
bottle jack to complete the assembly.. but it's in Salisbury NC for those
interested.
On Wednesday, November 13, 2013 11:14 PM, Scott Ritchey <ritche...@nc.rr.com>
wrote:
I've seen photos of that Benz tool and it looks pretty slick. There is a
Sir Tools clone (which is reported to work) for about $250+tax+$hipping and
better copies (allegedly) for hundred(s) more. So I decided to get an S&W
Shield instead. If the $100 tool does the job, I'll be happy.
-----Original Message-----
From: Mercedes [mailto:mercedes-boun...@okiebenz.com] On Behalf Of Rich
Thomas
Sent: Wednesday, November 13, 2013 5:36 PM
To: Mercedes Discussion List
Subject: Re: [MBZ] 126 Lower Ball Joints
Interesting. The Benz tool is like a clamp sort of thing with a screw
on to press down on the BJ (I think the fairing around the part that
goes in the knuckle -- it fits over the stud) at the proper angle.
--R
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
