I hate seeing this thread on a 98 E 300, especially since I just put one of my garage. Except I was smart and got a diesel.
Bob R On Feb 8, 2016 8:34 AM, "Curt Raymond via Mercedes" <mercedes@okiebenz.com> wrote: > Or tap it out with a bunch, or grind it out with a small die grinder, or > maybe get lucky and have it break beating on it with a small punch... > Lots of options, none of them all that easy. > Actually is it an aluminum casting? Check out AVE on youtube, he recently > showed how to use alum to dissolve a steel bolt in an aluminum casting. > -Curt > > From: Meade Dillon via Mercedes <mercedes@okiebenz.com> > To: Mercedes Discussion List <mercedes@okiebenz.com> > Cc: Meade Dillon <dillonm...@gmail.com> > Sent: Sunday, February 7, 2016 2:29 PM > Subject: Re: [MBZ] From bad to worse to nightmare > > Spot weld a bolt to the broken tap, then you can back it out? > > ------------- > Max > Charleston SC > > On Sun, Feb 7, 2016 at 2:09 PM, Kaleb C. Striplin via Mercedes < > mercedes@okiebenz.com> wrote: > > > No there must be a better answer than that > > > > > > > _______________________________________ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > > > > _______________________________________ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com