Kroil for a while then pop the screw heads a good lick or two
with a hammer and try again to loosen them.
Rinse and repeat and if not you could also put the hex driver in
and hit that good and hard with a hammer. sooner or later it
should come loose.
Worse comes to worse just drill out the head just enough for it
to pop off, take the stop off and use a vise grip to turn what's
left of the screw out. Without the head they usually come out
real easy.
Manfred
Scott Ritchey via Mercedes wrote:
I tried to replace the driver's door striker on my 82 SD (same symptoms and cause) but I Couldn't get the screws lose. I had started to deform the hex socket in some of the screws so I quit before I really buggered them.
Is there a trick to this?
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com