I have several pairs but they seem to be missing Sent from my iPhone
> On Mar 26, 2017, at 12:13 PM, Dan--- via Mercedes <[email protected]> > wrote: > > I was able to take mine apart without any special tools other than snap ring > pliers. > > It's really, really easy to reseal these. > > And shame on you, Kaleb - how can you have all that stuff and not have at > least one pair of snap ring pliers?? > > -D > > Sent from my iPad > >> On Mar 26, 2017, at 12:43 PM, Kaleb Striplin via Mercedes >> <[email protected]> wrote: >> >> I have a clutch holding tool but need to locate or go get some snap ring >> pliers. >> >> Sent from my iPhone >> >>> On Mar 26, 2017, at 11:35 AM, Meade Dillon via Mercedes >>> <[email protected]> wrote: >>> >>> Just do the seals (front, rear, and top), they are easy once you get past >>> the clutch. If you've got the clutch tool, this is a no-brainer. >>> >>> I'm going on something like ten years on the compressor I put new seals in. >>> >>> ------------- >>> Max >>> Charleston SC >>> >>> On Sun, Mar 26, 2017 at 12:24 PM, Kaleb Striplin via Mercedes < >>> [email protected]> wrote: >>> >>>> So I removed the compressor from the sdl with the intentions of replacing >>>> it with a new one I had on the shelf. I pulled the top like attachment >>>> plate and it's got the 4 individual ports where as the new one has the >>>> single large rectangle plate. I did around a bit and all the used >>>> compressors I have on the shelf have the 4 port deal. I have replaced many >>>> compressors with the rectangle plate. I found one that was still mounted to >>>> the engine and it does have the correct top plate but just to make are I >>>> decided to test mount the compressor. Nope, it ain't right, mounting holes >>>> are too far apart. Crap, so I am shut down for the moment. I can either >>>> just put in a used one and hope it works to get I done today, order the >>>> seal kit like poos does and reseal one of the used ones I have, or get a >>>> new/rebuilt one. Crap. I am sure poos would say get the seals and go that >>>> route but I am scared. >>>> >>>> >>>> Sent from my iPhone >>>> >>>> _______________________________________ >>>> http://www.okiebenz.com >>>> >>>> To search list archives http://www.okiebenz.com/archive/ >>>> >>>> To Unsubscribe or change delivery options go to: >>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>>> >>>> >>> _______________________________________ >>> http://www.okiebenz.com >>> >>> To search list archives http://www.okiebenz.com/archive/ >>> >>> To Unsubscribe or change delivery options go to: >>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>> >> >> >> _______________________________________ >> http://www.okiebenz.com >> >> To search list archives http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> >> > > > _______________________________________ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
