OM617 I had to remove the PS belt and loosened up the compressor bolts enough to adjust position of the compressor. There are no tensioner releases I know of
clay > On Jul 5, 2017, at 1:51 PM, Dan Penoff via Mercedes <mercedes@okiebenz.com> > wrote: > > Aren’t you using the belt tensioner release? > > -D > > >> On Jul 5, 2017, at 4:06 PM, clay via Mercedes <mercedes@okiebenz.com> wrote: >> >> Thank you for the offer. OE compressor and the system holds vacuum for over >> 4 hours and was sucked down for 90 minutes, so bone dry. I have the belt >> that should fit (same as all others up front) I just can not get the >> distance between spinners short enough to loop over the edge on the >> compressor. Missing by half an inch maybe. Might could use some sort of >> lever to shoe horn it, but I have limited appendages and pry bar on the >> compressor, hand on belt, is not allowing a spare hand to manipulate shoe >> horn >> >> clay > > > _______________________________________ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com