That's frustrating.  This channel was a concern, the aftermarket glass that I 
just replaced had a channel that separated from the glass shortly after 
installation.  Very frustrating, could never get the rubber strip to lay down 
and hold.

Rich and I worked pretty hard to remove the windshield intact, I'm very happy 
that I was able to reuse it.  Not the easiest route, but the end result was 
worth it.
-- 
Max Dillon
Charleston SC

On February 23, 2019 6:33:04 PM EST, Dan Penoff via Mercedes 
<[email protected]> wrote:
>That channel was a major issue for me when I was trying and ultimately
>gave up finding a windshield for my 93 400E.
>
>I gave the VIN and all identifying information to the glass company,
>and they guy came THREE times with the later windshield that had the
>bracket. I think it would have fit, however, I wasn’t taking a chance.
>I sent him back every time with the information and we took all the
>trim off and took pictures of the existing windshield so he could prove
>to his people that it didn’t have a bracket. I even arranged for them
>to get the correct one from Mercedes, but they didn’t want to go that
>route because they couldn’t make as much money since it wasn’t cheap
>imported glass that everyone uses these days.
>
>I finally gave up after the third try.
>
>Glad yours worked out.
>
>-D
>
>
>> On Feb 23, 2019, at 6:10 PM, Meade Dillon via Mercedes
><[email protected]> wrote:
>> 
>> Follow-up on the installation of a "new" windshield in my '95 E300. 
>Very
>> happy with the installation.  One of the tricky parts on the later
>124 cars
>> is a plastic channel the runs along the bottom edge of the
>windshield.  The
>> channel accepts the top edge of a rubber gasket, which bridges the
>gap
>> between the bottom edge of the glass and the plastic water channels
>that
>> drain off water so it doesn't go down into the electronics and such
>between
>> the firewall and the bulkhead of the passenger compartment.
>> 
>> I had to find an aftermarket supplier of that channel, as MB does not
>sell
>> it separately from a new windshield.  I am happy to report that this
>> channel fits quite nicely.
>> -------------
>> Max
>> Charleston SC
>> _______________________________________
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
>> 
>
>
>_______________________________________
>http://www.okiebenz.com
>
>To search list archives http://www.okiebenz.com/archive/
>
>To Unsubscribe or change delivery options go to:
>http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

_______________________________________
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Reply via email to