I was able to tighten all the links with the subframe mounted in the car. I 
think I removed a tire, jacked up the spring

Max Dillon
Charleston SC

Jan 7, 2020 10:59:17 PM Brian Toscano via Mercedes <mercedes@okiebenz.com>:

> When I worked on 124/201 I would assemble the subframe next to the vehicle
> and then put it on a transmission jack and roll it into place and secure it
> to the unibody, connect driveshaft, and brake lines, etc. The 5-link
> suspension can be tightened once it's installed under the vehicle by
> jacking up under the differential. Just don't drive it far without getting
> an alignment. The key point with any suspension work is to tighten
> bushings with the weight of the vehicle on the bushings (NOT with the tires
> hanging in the air). Using this method my ride height was within 1 mm of
> factory spec according to the dealer's alignment printout. :)
> 
> 
> On Tue, Jan 7, 2020 at 8:27 PM Curley McLain via Mercedes <
> mercedes@okiebenz.com> wrote:
> 
> 
> > What is the best way to install the rear subframe? Who has BTDT?
> > 
> > i'm thinking to install the links and wheel carriers to the subframe
> > first. a straightedge across the top should line up with the centers
> > of the outer end of the top link. so that solves the problem of trying
> > to tighten links you can't get to with the subframe installed, with the
> > weight of the car on the subframe. (book method)
> > 
> > I can tighten all the links, then install the subframe with springs.
> > The weight is in the wheel carriers.
> > 
> > then install the axles and diff.
> > 
> > 
> > as an alternative:
> > I could try assembling diff, axles and subframe, then raising it up,
> > with a series of blocks, left, right, front and rear. It would be
> > harder to get everything in place and hard to list by hand to push into
> > the final place for bolts.
> > 
> > I am not ready yet. Have to patch holes in the body, weld up the
> > subframe mounts, replace brake lines, fuel hoses, etc before
> > installing. Then assemble the links and wheel carriers to the subframe.
> > 
> > _______________________________________
> > http://www.okiebenz.com
> > 
> > To search list archives http://www.okiebenz.com/archive/
> > 
> > To Unsubscribe or change delivery options go to:
> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> > 
> > 
> > 
> _______________________________________
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


_______________________________________
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Reply via email to