On Sat, 7 Mar 2020 22:32:38 -0700 Craig via Mercedes <mercedes@okiebenz.com> wrote:
> Well, I removed everything on both sides of the front radiator support > on our '93 E300D to change the serpentine belt tensioner and idler > pulley and to clean up all the cruft therein. While I did so, I took > pictures ... I just looked at the pictures, but saw none which showed the underneath side of the radiator support. I do recall the release cable comes underneath the radiator support from the left and then goes to the latch on the top of the support. The condenser mounts from behind the radiator support. You will have to remove the horn, fans, and fan shroud. You may have to remove the clips which hold the radiator shroud, radiator, and condenser to the back of the radiator support so you can lean them to the rear, if the condenser is in the way of the latch mechanism. Craig _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com