What size thread fitting will I need to thread into the injector hole or glow plug hole? I might have to custom tap a 1/4" NPT into an old injector if it's not standard enough.....any ideas?
Luther ~ ~I can tell you that without looking. Figure 20:1 compression, you ~should be getting in excess of 300 psi. I think you are mistaking ~volume for pressure. ~ ~A 240 engine would have 0.6l displacement per cylinder. Valved ~for the purpose you'd get 0.6l per revolution, so at 2400 RPM ~you'd get 1400l/m per cylinder, or about 50 CFM. ~ ~-- Jim ~ ~ -- Luther KB5QHU Alma, Ark '83 300SD (231,xxx kmi) '82 300CD (159,222 kmi) '82 300D (74,000 kmi) needs MAJOR work
