Well, how much do you want to mess with it, that is the big question, or do
you just throw it out and get a new one.

How hard is it to open up the machine to get to the control card?  If
that's not too hard, and you are going to get paid for a new machine by the
home warranty people, do you want to spend their money on the old machine?
What happens if you fix this machine, then in another year or two it breaks
and you make another claim, will they say "No we totaled that washer
before, paid on that, so no warranty coverage for YOU!".
-------------
Max
Charleston SC


On Fri, Jul 24, 2020 at 7:07 PM Kaleb Striplin via Mercedes <
mercedes@okiebenz.com> wrote:

> Found one there, to get the part number then found it elsewhere for
> about $112.  Not sure if it is worth spending that. If I knew for sure
> it would fix it I would do it maybe.  I don't want to buy it and it not
> work.
>
> On 7/24/2020 5:53 PM, Meade Dillon via Mercedes wrote:
> > Maybe find one on Ebay?
> >
> > Maybe these guys?  https://www.appliancepartspros.com/
> >
> > Have a local appliance repair place that might have it in stock?
> > -------------
> > Max
> > Charleston SC
> >
> >
> > On Fri, Jul 24, 2020 at 6:33 PM Kaleb Striplin via Mercedes <
> > mercedes@okiebenz.com> wrote:
> >
> >> Well that was a no go, I pulled both the fill and drain hose off it and
> >> tried it, same error.  The 3 pulses the pump does discharges water just
> >> fine though.  I am now suspecting some sort of control board issue.
> >> Looking at parts diagrams on various sites I see it in the diagram but
> >> the actual part is not listed. Maybe this is what the guy was talking
> >> about as not available anymore.  If that is the case, then no choice but
> >> to replace the washer.  Unbelievable.
> >>
> >> On 7/24/2020 5:09 PM, Kaleb Striplin via Mercedes wrote:
> >>> So this is the only potential blockage I can find. This assembly mounts
> >> to the side of the washer. It appears to be to serve 2 purposes,
> draining
> >> and filling goes they it. At the bottom there are 2 ports one is the
> hose
> >> that comes out from the discharge pump. It flows into the elbow which
> flows
> >> to the other port at the bottom then out to the sink. The small nipple
> on
> >> the bottom is the water supply from the fill valve. Water comes in there
> >> and flows thru this unit and emptied out the big middle hole to the
> >> interior of the washer. On the elbow for the drain you can see a channel
> >> that routes around thru the unit and seems to connect with the 4th
> square
> >> port on the right that connects to nothing. The water supply channel
> also
> >> seems to connect to this venting system. You can see a section at the
> top
> >> right of the big hole that looks like it’s full of junk. Nearest I can
> tell
> >> there should not be any fluids flowing thru here but it looks dirty. I’m
> >> thinking this is all supposed to be air venting. There is no way to take
> >> this apart to clean it out. When the pump tried to run it pushed a small
> >> amount of fluid but I’m wondering if it is supposed to vent air and it
> had
> >> an air lock? Thoughts? This part is only about $20 so thinking about
> >> replacing it to see. I guess a test I cold do would be to route the hose
> >> from the pump output into a bucket and see if the washer turns on.
> >>>
> >>>
> >>> Sent from my iPhone
> >>>
> >>> _______________________________________
> >>> http://www.okiebenz.com
> >>>
> >>> To search list archives http://www.okiebenz.com/archive/
> >>>
> >>> To Unsubscribe or change delivery options go to:
> >>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >>>
> >> _______________________________________
> >> http://www.okiebenz.com
> >>
> >> To search list archives http://www.okiebenz.com/archive/
> >>
> >> To Unsubscribe or change delivery options go to:
> >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >>
> >>
> > _______________________________________
> > http://www.okiebenz.com
> >
> > To search list archives http://www.okiebenz.com/archive/
> >
> > To Unsubscribe or change delivery options go to:
> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
>
> _______________________________________
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
_______________________________________
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

Reply via email to