Try running the defrosrt mode - that forces full hot and full fan -at the windshield. If you don't get heat that way, I'm pretty sure that your mono valve is dead. You can check voltage to it - if there isn't any, you should have full heat. The parts mentioned below are for the repair kit. If the diaghram is torn, I think you get too much heat. The plunger can get stuck, I suppose, which would [-revent movement, so if it is stuck in the cold setting, you won't get heat. It's supposed to fail in full heat mode by default - your situation might be different.
On 10/16/06, Dave Wakin <[EMAIL PROTECTED]> wrote:
Might be your monovalve - located by the firewall, towards left-center. Last time I changed it, it was a $30 part from Rusty. 4 flat head screws and about 5 minutes to check it. Dave Wakin
-- OK Don, KD5NRO Norman, OK "The Americans will always do the right thing... after they've exhausted all the alternatives." Sir Winston Churchill '90 300D, '87 300SDL, '81 240D, '78 450SLC, '97 Ply Grand Voyager
