Well, now this is fun. My copy has two page 4 and no page 5 (I'll try with Acrobat in a minute in case Preview is screwy instead) and I don't have the diagram. What you want to do is disconnect the left side, were the servo is, from the right side which is only a pivot. The link has a flexible bit in it that is a weak spot, and will break if over-flexed or pulled.
I think you are correct -- if it's a pin that holds the rod going across the bottom of the box to the passenger side flap, that's it. Very annoying, the one bit I need isn't here. And I did that box about four years ago and have no solid recollection of anything but breaking the stupid link and having to do a "barnyard" repair. I believe they tell you to pull it after loosening the side boxes, do it first, and re-connect after you have the side boxes in place going back in. Peter On Jun 10, 2008, at 9:10 AM, Wilton Strickland wrote: > Peter, re, floor vent flap link "not in manual", isn't that what > they're > talking about and showing in drawing at bottom of page 4 of job > 83-554 in > the MB service CD? "Pull rt side out slightly and unclip joint for > leg room > flap (arrow)." Or is there another one in there somewhere to > "bite" me? > > Wilton > > > _______________________________________ > http://www.okiebenz.com > For new parts see official list sponsor: http://www.buymbparts.com/ > For used parts email [EMAIL PROTECTED] > > To Unsubscribe or change delivery options go to: > http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
