To all,
I am using QTP 11 and PuTTY along with the TE add-in record some
tests. The telnet server I am connecting to is not compatable to the
hllapi standard. It is connecting with the VT100 protocol. I have set
the QTP TE add-in to use the PRconfigured PuTTY settings. As I am
recording text only I have the following 2 object types to work with:
TeWindow("TeWindow")
TeTextScreen("TeTextScreen
The problem I am having is that I am able to record the tests but upon
trying to run the tests after the initial appearence of the telnet
screen QTP will not recognize the
TeWindow("TeWindow").TeTextScreen("TeTextScreen" object as being in
the OR. I have checked and it is there and nothing changes even if I
add the object again. I have looked for any other people having this
problem and only found one other instance that is similar to my
problem but it is on another forum and had no answer given.
The issue only occurs in the first couple lines of the code if I stop
the test and re-run in the debug from step mode the object is
identified and the test seems to proceed normally.
Has anyone else had a similar issue or can anyone point me in the
correct direction to find the help I need.
Thanks,
Jim
--
You received this message because you are subscribed to the Google
"QTP - HP Quick Test Professional - Automated Software Testing"
group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/MercuryQTP?hl=en
