did you try with descriptive? I had faced a similar issue but at that time there were multiple reusable actions which were using different addins and the driver was calling these reusable actions.
On Tue, Jun 28, 2011 at 1:18 PM, Jimmie Parson <[email protected]> wrote: > To all, > > I am using QTP 11 and PuTTY along with the TE add-in record some > tests. The telnet server I am connecting to is not compatable to the > hllapi standard. It is connecting with the VT100 protocol. I have set > the QTP TE add-in to use the PRconfigured PuTTY settings. As I am > recording text only I have the following 2 object types to work with: > > TeWindow("TeWindow") > TeTextScreen("TeTextScreen > > The problem I am having is that I am able to record the tests but upon > trying to run the tests after the initial appearence of the telnet > screen QTP will not recognize the > TeWindow("TeWindow").TeTextScreen("TeTextScreen" object as being in > the OR. I have checked and it is there and nothing changes even if I > add the object again. I have looked for any other people having this > problem and only found one other instance that is similar to my > problem but it is on another forum and had no answer given. > > The issue only occurs in the first couple lines of the code if I stop > the test and re-run in the debug from step mode the object is > identified and the test seems to proceed normally. > > > Has anyone else had a similar issue or can anyone point me in the > correct direction to find the help I need. > > > Thanks, > > > Jim > > -- > You received this message because you are subscribed to the Google > "QTP - HP Quick Test Professional - Automated Software Testing" > group. > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group at > http://groups.google.com/group/MercuryQTP?hl=en -- Regards, Ganesh Muralidharan 'God Never Forgets' -- You received this message because you are subscribed to the Google "QTP - HP Quick Test Professional - Automated Software Testing" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/MercuryQTP?hl=en
