On Fri, May 20, 2016 at 10:47 PM, Francisco Jerez <curroje...@riseup.net> wrote:
> The purpose of this series is to improve the back-end infrastructure > so that lowering of most IR instructions that are too wide to execute > natively (which is far more common than usual in SIMD32 dispatch mode) > happens semi-automatically at the IR level. > > Patches 1-6 address some issues in a few optimization and lowering > passes that would otherwise lead to regressions in the following > changes of the series. Patches 7-12 move the construction of several > messages into lower_logical_sends() so the SIMD lowering pass can deal > with them. Patches 13-22 teach the SIMD lowering pass about a number > of additional ISA restrictions that can be enforced easily by > splitting SIMD instructions into smaller chunks. Patches 23-31 are > mainly about removing generator code that wouldn't have worked on > SIMD32 but is no longer necessary given the infrastructure introduced > in the first part of the series. > > Some of the changes from this series that remove SIMD workarounds > currently implemented in the generator could potentially be left out > at least in the initial merge at the cost of losing ARB_compute_shader > support on VLV and low-end IVB which like Gen8+ don't have enough > threads per subslice to reach the workgroup size requirement specified > by the extension in SIMD16 mode. Some other changes like the removal > of DDY unrolling from the generator are completely optional right now > although they will eventually be required for SIMD32 fragment shader > support and they seemed like a nice clean-up. > > Expect two more series of roughly the same size coming up soon-ish, > the second one will get the generator code in good shape for SIMD32, > and the third one will address some of the remaining issues of the > compiler back-end so we can start plumbing 32-wide compute shaders > through it and turn the GL 4.3 switch. > > [PATCH 01/31] i965/fs: Fix byte_offset() for MRF/ARF/FIXED_GRF regs. > [PATCH 02/31] i965/fs: Generalize is_uniform() to is_periodic(). > [PATCH 03/31] i965/fs: No need to unzip SIMD-periodic sources during SIMD > lowering. > [PATCH 04/31] i965/fs: Handle instruction predication in SIMD lowering > pass. > [PATCH 05/31] i965/fs: Fix CSE temporary copy for some LOAD_PAYLOAD corner > cases. > [PATCH 06/31] i965/fs: Avoid constant propagation when the type sizes > don't match. > 5 and 6 are Reviewed-by: Jason Ekstrand <ja...@jlekstrand.net> > [PATCH 07/31] i965/fs: Hide varying pull constant load message setup > behind logical opcode. > [PATCH 08/31] i965/fs: Implement promotion of varying pull loads on Gen4 > during SIMD lowering. > [PATCH 09/31] i965/fs: Rename Gen4 physical varying pull constant load > opcode. > [PATCH 10/31] i965/fs: Add missing get_latency_gen7() cases for the Gen7 > pull constant opcodes. > [PATCH 11/31] i965/fs: Lower math into Gen4-5 send-like instructions in > lower_logical_sends. > [PATCH 12/31] i965/fs: Handle SAMPLEINFO consistently like other texturing > instructions. > > [PATCH 13/31] i965/fs: Enforce extended math exec size limits during SIMD > lowering. > [PATCH 14/31] i965/fs: Enforce common regioning restrictions by SIMD > splitting. > [PATCH 15/31] i965/fs: Implement workaround for IVB CMP dependency race in > the SIMD lowering pass. > [PATCH 16/31] i965/fs: Implement HSW BFI exec size workarounds in the SIMD > lowering pass. > [PATCH 17/31] i965/fs: Assert that IF instruction with embedded compare > has legal exec_size. > [PATCH 18/31] i965/fs: Calculate maximum execution size of MOV_INDIRECT > correctly. > [PATCH 19/31] i965/fs: Apply usual FPU-like execution size restrictions to > MULH. > [PATCH 20/31] i965/fs: Lower DDY instructions to SIMD8 during SIMD > lowering time > 13-20 Reviewed-by: Jason Ekstrand <ja...@jlekstrand.net> > [PATCH 21/31] i965/fs: Lower LOAD_PAYLOAD instructions of unsupported > width. > This one is Reviewed-by: Jason Ekstrand <ja...@jlekstrand.net> with substantial reservations. If we ever hit the asserts, we can fix the bugs then. [PATCH 22/31] i965/fs: Limit SIMD width of various virtual opcodes to the > maximum supported value. > [PATCH 23/31] i965/fs: Remove handcrafted math SIMD lowering from the > generator. > [PATCH 24/31] i965/fs: Set default access mode to Align1 for all > instructions in the generator. > [PATCH 25/31] i965/fs: Drop lowering code for a few three-source > instructions from the generator. > [PATCH 26/31] i965/fs: Drop Gen7 CMP SIMD unrolling workaround from the > generator. > [PATCH 27/31] i965/fs: Remove manual unrolling of BFI instructions from > the generator. > [PATCH 28/31] i965/fs: Remove manual splitting of DDY ops in the generator. > [PATCH 29/31] i965: Define brw_int_type() helper. > [PATCH 30/31] i965/fs: Remove extract virtual opcodes. > [PATCH 31/31] i965/fs: Remove FS_OPCODE_PACK_STENCIL_REF virtual > instruction. > 22-31 are Reviewed-by: Jason Ekstrand <ja...@jlekstrand.net> > _______________________________________________ > mesa-dev mailing list > mesa-dev@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/mesa-dev >
_______________________________________________ mesa-dev mailing list mesa-dev@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/mesa-dev