My system:

  AMD Athlon 500
  1stMainboard FIC SD11 Athlon mobo with BIOS NC603/NC604
  equipped with AMD 751 AGP system
  and VIA Super South 82C686A peripheral bus controller
  256 MB PC100 SDRAM 8 ns
  Adaptec  AHA-2940 Ultra Wide SCSI
  IBM DDRS-34560W Rev: S71D 4.5 GB
  STB (original 3Dfx) Voodoo3 3000 (NOT over clocked!!!)

SunWave1>cat /proc/version
Linux version 2.3.18ac9 (root@SunWave1) (gcc version pgcc-2.95.1
19990816 (release)) #1 Mon Sep 27 17:07:45 MET 1999

SunWave1>cat /proc/cpuinfo
processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 6
model           : 1
model name      : AMD-K7(tm) Processor
stepping        : 2
cpu MHz         : 499.052640
cache size      : 512 KB
fdiv_bug        : no
hlt_bug         : no
sep_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr 6 mce cx8 sep mtrr pge 14 cmov
fcmov 22 mmx 30 3dnow
bogomips        : 496.44

SunWave1>cat /proc/mtrr
reg00: base=0x00000000 (   0MB), size= 256MB: write-back, count=1
reg01: base=0xc8000000 (3200MB), size=  16MB: write-combining, count=1

Remember that the Athlon is full (!!!) PPro/PII/PIII compatible in this
feature.

SunWave1>lspci -v

[snip]

01:05.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo3 (rev
01)
        Subsystem: Unknown device 121a:003a
        Flags: 66Mhz, fast devsel, IRQ 9
        Memory at ec000000 (32-bit, non-prefetchable)
        Memory at c8000000 (32-bit, prefetchable)
        I/O ports at ac00
        Capabilities: [54] AGP version 1.0
        Capabilities: [60] Power Management version 1

Here are some first benchmarks with Q3 on Linux* and Windows 98 SE*.
I've used all modes high except for 'texture detail'. For that I've used
the second highest value (default):-)

Resolution        Linux        Windows 98 SE

1152x664            33.2                34.8
1024x768            40.5                42.1
800x600             52.8                57.9
640x480             55.3                68.8

*footnote: Linux with 3DNow!, Windows with the 'new' Athlon 3DNow!
optimizations

Now some 'raw' Mesa-3.1 CVS performance:

SunWave1>pwd
/usr/local/Mesa/demos
SunWave1>./trispd
For options:  trispd -help
MMX cpu detected.
3Dnow cpu detected.
video memory unprotecting
Dither: on
ShadeModel: smooth
DepthTest: off
Size: 50 pixels
RedBits: 5  GreenBits: 6  BlueBits: 5
Rate: 3115008 tri in 2.238s = 1.39187e+06 tri/s  69593565 pixels/s
Rate: 3115008 tri in 2.244s = 1.38815e+06 tri/s  69407486 pixels/s
Rate: 3115008 tri in 2.248s = 1.38568e+06 tri/s  69283985 pixels/s
Rate: 3115008 tri in 2.249s = 1.38506e+06 tri/s  69253179 pixels/s
Rate: 3115008 tri in 2.245s = 1.38753e+06 tri/s  69376570 pixels/s
Rate: 3115008 tri in 2.256s = 1.38077e+06 tri/s  69038297 pixels/s
Rate: 3115008 tri in 2.242s = 1.38939e+06 tri/s  69469402 pixels/s
Rate: 3115008 tri in 2.246s = 1.38691e+06 tri/s  69345681 pixels/s

What do you think about it???

Regards,
        Dieter

---
Dieter Nützel
Graduate Student, Computer Science

University of Hamburg
Department of Computer Science
Cognitive Systems Group
Vogt-Kölln-Straße 30
D-22527 Hamburg, Germany

!!!!!!!!!! Attention new 'mail address @home' !!!!!!!!!!
email: Dieter Nützel <[EMAIL PROTECTED]>
@home: Dieter Nützel <[EMAIL PROTECTED]>

_________________________________________________________

DRI (Direct Rendering Infrastructure) for Linux.
Because I do 3D medical visualization as my thesis.
_________________________________________________________




_______________________________________________
Mesa-dev maillist  -  [EMAIL PROTECTED]
http://lists.mesa3d.org/mailman/listinfo/mesa-dev

Reply via email to