Ping.
On Thu, Oct 10, 2013 at 03:10:56PM +0000, Maupin, Chase wrote: > > > >-----Original Message----- > >From: [email protected] [mailto:meta-arago- > >[email protected]] On Behalf Of Monk, Roger > >Sent: Thursday, October 10, 2013 11:02 AM > >To: [email protected] > >Subject: [meta-arago] [PATCHv2 04/11] ti-connectivity/wpa- > >supplicant-wl18xx: Add Wilink8 r8.a7.02 > > > > * Add v r8.a7.02 engineering release wpa supplicant > > * This release supports the omap-a15 devices (omap5-evm/dra7- > >evm) with ES 2.1 WL8 > > * OMAP5432 UEVMs with the following SKU contain ES2.1 > >Wilink8 TDK 18xx module > > * OMAP5432x-xx-x1-xx > > * Bump PR > > * Replace defconfig with original wpa-supplicant defconfig > > * Add back SDK specific defconfig changes > > * Enable WFD (WiFi Display) > > * Revert some android patches which prevent WFD > > > >Signed-off-by: Roger Monk <[email protected]> > >--- > > ...0001-revert-android-patches-to-enable-wfd.patch | 44 ++++++ > > .../defconfig | 150 > >+++++++++++++++----- > > ....a6.01.bb => wpa-supplicant-wl18xx_r8.a7.02.bb} | 11 +- > > 3 files changed, 166 insertions(+), 39 deletions(-) > > create mode 100644 meta-arago-extras/recipes-connectivity/wpa- > >supplicant/wpa-supplicant-wl18xx-r8.a7.02/0001-revert-android- > >patches-to-enable-wfd.patch > > copy meta-arago-extras/recipes-connectivity/wpa-supplicant/{wpa- > >supplicant-r5.sp4.01 => wpa-supplicant-wl18xx-r8.a7.02}/defconfig > >(74%) > > mode change 100755 => 100644 > > copy meta-arago-extras/recipes-connectivity/wpa-supplicant/{wpa- > >supplicant-wl18xx_r8.a6.01.bb => wpa-supplicant- > >wl18xx_r8.a7.02.bb} (78%) > > > >diff --git a/meta-arago-extras/recipes-connectivity/wpa- > >supplicant/wpa-supplicant-wl18xx-r8.a7.02/0001-revert-android- > >patches-to-enable-wfd.patch b/meta-arago-extras/recipes- > >connectivity/wpa-supplicant/wpa-supplicant-wl18xx-r8.a7.02/0001- > >revert-android-patches-to-enable-wfd.patch > >new file mode 100644 > >index 0000000..29528b4 > >--- /dev/null > >+++ b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa- > >supplicant-wl18xx-r8.a7.02/0001-revert-android-patches-to-enable- > >wfd.patch > >@@ -0,0 +1,44 @@ > >+ > >+diff -rupN a/src/common/wpa_ctrl.c b/src/common/wpa_ctrl.c > >+--- a/src/common/wpa_ctrl.c 2013-09-02 16:46:22.708023057 +0100 > >++++ b/src/common/wpa_ctrl.c 2013-08-30 10:22:19.811255355 +0100 > >+@@ -164,6 +164,10 @@ try_again: > >+ return NULL; > >+ } > >+ > >++#if 0 > >++//IH this code is introduced in recent supplicant that appears > >to make RMD app calls to wpa_ctrl_recv() fail and > >++// the supplicant fails to write to the same socket!!! > >++// Temp fix to remove it, probably solution will be in app set > >up/usage?? > >+ /* > >+ * Make socket non-blocking so that we don't hang forever if > >+ * target dies unexpectedly. > >+@@ -176,7 +180,7 @@ try_again: > >+ /* Not fatal, continue on.*/ > >+ } > >+ } > >+- > >++#endif > >+ return ctrl; > >+ } > >+ > >+diff -rupN a/wpa_supplicant/wpa_supplicant.c > >b/wpa_supplicant/wpa_supplicant.c > >+--- a/wpa_supplicant/wpa_supplicant.c 2013-09-04 > >16:57:26.000000000 +0100 > >++++ b/wpa_supplicant/wpa_supplicant.c 2013-09-04 > >17:02:02.256720695 +0100 > >+@@ -3025,13 +3025,15 @@ next_driver: > >+ } > >+ > >+ #ifdef CONFIG_P2P > >++ #ifdef ANDROID > >+ if (os_strncmp(iface->ifname, "wlan0", 4) == 0) { > >+ wpa_printf(MSG_DEBUG, "Disable P2P on wlan0"); > >+ wpa_s->conf->p2p_disabled = 1; > >+ } > >+ > >+ if (os_strncmp(iface->ifname, "p2p0", 4) == 0) > >+- if (wpas_p2p_init(wpa_s->global, wpa_s) < 0) { > >++#endif > >++ if (wpas_p2p_init(wpa_s->global, wpa_s) < 0) { > >+ wpa_msg(wpa_s, MSG_ERROR, "Failed to init P2P"); > >+ return -1; > >+ } > >diff --git a/meta-arago-extras/recipes-connectivity/wpa- > >supplicant/wpa-supplicant-r5.sp4.01/defconfig b/meta-arago- > >extras/recipes-connectivity/wpa-supplicant/wpa-supplicant-wl18xx- > >r8.a7.02/defconfig > >old mode 100755 > >new mode 100644 > >similarity index 74% > >copy from meta-arago-extras/recipes-connectivity/wpa- > >supplicant/wpa-supplicant-r5.sp4.01/defconfig > >copy to meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa- > >supplicant-wl18xx-r8.a7.02/defconfig > >index b982e2a..80d2f63 > >--- a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa- > >supplicant-r5.sp4.01/defconfig > >+++ b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa- > >supplicant-wl18xx-r8.a7.02/defconfig > >@@ -39,18 +39,6 @@ > > #LIBS = -lssl > > > >################################################################## > >############# > > > >-#CC=$(CROSS_COMPILE)gcc > >-#CFLAGS += -DCONFIG_LIBNL20 > >-#CPPFLAGS += -DCONFIG_LIBNL20 > >-#LIBS += -L$(NFSROOT)/lib -lnl > >-#LIBS_p += -L$(NFSROOT)/lib > >-#LIBDIR = $(NFSROOT)/lib > >-#BINDIR = $(NFSROOT)/usr/sbin > >- > >-CONFIG_WAPI=y > >-CONFIG_LIBNL20=y > >-NEED_BGSCAN=y > >-CONFIG_BGSCAN_LEARN=y > > > > # Driver interface for Host AP driver > > #CONFIG_DRIVER_HOSTAP=y > >@@ -75,7 +63,7 @@ CONFIG_BGSCAN_LEARN=y > > #CONFIG_DRIVER_ATMEL=y > > > > # Driver interface for old Broadcom driver > >-# Please note that the newer Broadcom driver ("hybrid Linux > >driver") supportsBG > >+# Please note that the newer Broadcom driver ("hybrid Linux > >driver") supports > > # Linux wireless extensions and does not need (or even work) with > >the old > > # driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. > > #CONFIG_DRIVER_BROADCOM=y > >@@ -90,16 +78,22 @@ CONFIG_BGSCAN_LEARN=y > > #CONFIG_DRIVER_RALINK=y > > > > # Driver interface for generic Linux wireless extensions > >+# Note: WEXT is deprecated in the current Linux kernel version > >and no new > >+# functionality is added to it. nl80211-based interface is the > >new > >+# replacement for WEXT and its use allows wpa_supplicant to > >properly control > >+# the driver to improve existing functionality like roaming and > >to support new > >+# functionality. > > CONFIG_DRIVER_WEXT=y > > > > # Driver interface for Linux drivers using the nl80211 kernel > >interface > > CONFIG_DRIVER_NL80211=y > >+CONFIG_LIBNL20=y > > > > # Driver interface for FreeBSD net80211 layer (e.g., Atheros > >driver) > > #CONFIG_DRIVER_BSD=y > > #CFLAGS += -I/usr/local/include > > #LIBS += -L/usr/local/lib > >-#LIBS_p += -L/usr/local/libBG > >+#LIBS_p += -L/usr/local/lib > > #LIBS_c += -L/usr/local/lib > > > > # Driver interface for Windows NDIS > >@@ -121,11 +115,6 @@ CONFIG_DRIVER_NL80211=y > > # Driver interface for development testing > > #CONFIG_DRIVER_TEST=y > > > >-# Include client MLME (management frame processing) for test > >driver > >-# This can be used to test MLME operations in hostapd with the > >test interface. > >-# space. > >-#CONFIG_CLIENT_MLME=y > >- > > # Driver interface for wired Ethernet drivers > > CONFIG_DRIVER_WIRED=y > > > >@@ -177,6 +166,9 @@ CONFIG_EAP_OTP=y > > # EAP-PSK (experimental; this is _not_ needed for WPA-PSK) > > #CONFIG_EAP_PSK=y > > > >+# EAP-pwd (secure authentication using only a password) > >+#CONFIG_EAP_PWD=y > >+ > > # EAP-PAX > > #CONFIG_EAP_PAX=y > > > >@@ -208,6 +200,11 @@ CONFIG_EAP_LEAP=y > > CONFIG_WPS=y > > # Enable WSC 2.0 support > > CONFIG_WPS2=y > >+# Enable WPS external registrar functionality > >+#CONFIG_WPS_ER=y > >+# Disable credentials for an open network by default when acting > >as a WPS > >+# registrar. > >+#CONFIG_WPS_REG_DISABLE_OPEN=y > > > > # EAP-IKEv2 > > #CONFIG_EAP_IKEV2=y > >@@ -224,7 +221,10 @@ CONFIG_SMARTCARD=y > > # Enable this if EAP-SIM or EAP-AKA is included > > #CONFIG_PCSC=y > > > >-# Development testingBG > >+# Support HT overrides (disable HT/HT40, mask MCS rates, etc.) > >+#CONFIG_HT_OVERRIDES=y > >+ > >+# Development testing > > #CONFIG_EAPOL_TEST=y > > > > # Select control interface backend for external programs, e.g, > >wpa_cli: > >@@ -242,6 +242,10 @@ CONFIG_CTRL_IFACE=y > > # the resulting binary. > > #CONFIG_READLINE=y > > > >+# Include internal line edit mode in wpa_cli. This can be used as > >a replacement > >+# for GNU Readline to provide limited command line editing and > >history support. > >+#CONFIG_WPA_CLI_EDIT=y > >+ > > # Remove debugging code that is printing out debug message to > >stdout. > > # This can be used to reduce the size of the wpa_supplicant > >considerably > > # if debugging code is not needed. The size reduction can be > >around 35% > >@@ -295,13 +299,16 @@ CONFIG_BACKEND=file > > # unix = UNIX/POSIX like systems (default) > > # win32 = Windows systems > > # none = Empty template > >-#CONFIG_OS=unix > >+CONFIG_OS=unix > > > > # Select event loop implementation > > # eloop = select() loop (default) > > # eloop_win = Windows events and WaitForMultipleObject() loop > > # eloop_none = Empty template > >-#CONFIG_ELOOP=eloop > >+CONFIG_ELOOP=eloop > >+ > >+# Should we use poll instead of select? Select is used by > >default. > >+#CONFIG_ELOOP_POLL=y > > > > # Select layer 2 packet implementation > > # linux = Linux packet socket (default) > >@@ -310,7 +317,7 @@ CONFIG_BACKEND=file > > # winpcap = WinPcap with receive thread > > # ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) > > # none = Empty template > >-#CONFIG_L2_PACKET=linux > >+CONFIG_L2_PACKET=linux > > > > # PeerKey handshake for Station to Station Link (IEEE 802.11e > >DLS) > > CONFIG_PEERKEY=y > >@@ -323,18 +330,24 @@ CONFIG_PEERKEY=y > > > > # Select TLS implementation > > # openssl = OpenSSL (default) > >-# gnutls = GnuTLS (needed for TLS/IA, see also > >CONFIG_GNUTLS_EXTRA) > >+# gnutls = GnuTLS > > # internal = Internal TLSv1 implementation (experimental) > > # none = Empty template > > #CONFIG_TLS=openssl > > > >-# Whether to enable TLS/IA support, which is required for EAP- > >TTLSv1. > >-# You need CONFIG_TLS=gnutls for this to have any effect. Please > >note that > >-# even though the core GnuTLS library is released under LGPL, > >this extra > >-# library uses GPL and as such, the terms of GPL apply to the > >combination > >-# of wpa_supplicant and GnuTLS if this option is enabled. BSD > >license may not > >-# apply for distribution of the resulting binary. > >-#CONFIG_GNUTLS_EXTRA=y > >+# TLS-based EAP methods require at least TLS v1.0. Newer version > >of TLS (v1.1) > >+# can be enabled to get a stronger construction of messages when > >block ciphers > >+# are used. It should be noted that some existing TLS v1.0 -based > >+# implementation may not be compatible with TLS v1.1 message > >(ClientHello is > >+# sent prior to negotiating which version will be used) > >+#CONFIG_TLSV11=y > >+ > >+# TLS-based EAP methods require at least TLS v1.0. Newer version > >of TLS (v1.2) > >+# can be enabled to enable use of stronger crypto algorithms. It > >should be > >+# noted that some existing TLS v1.0 -based implementation may not > >be compatible > >+# with TLS v1.2 message (ClientHello is sent prior to negotiating > >which version > >+# will be used) > >+#CONFIG_TLSV12=y > > > > # If CONFIG_TLS=internal is used, additional library and include > >paths are > > # needed for LibTomMath. Alternatively, an integrated, minimal > >version of > >@@ -396,6 +409,21 @@ CONFIG_CTRL_IFACE_DBUS_INTRO=y > > # Add support for writing debug log to a file > >(/tmp/wpa_supplicant-log-#.txt) > > CONFIG_DEBUG_FILE=y > > > >+# Send debug messages to syslog instead of stdout > >+#CONFIG_DEBUG_SYSLOG=y > >+# Set syslog facility for debug messages > >+#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON > >+ > >+# Add support for sending all debug messages (regardless of debug > >verbosity) > >+# to the Linux kernel tracing facility. This helps debug the > >entire stack by > >+# making it easy to record everything happening from the driver > >up into the > >+# same file, e.g., using trace-cmd. > >+#CONFIG_DEBUG_LINUX_TRACING=y > >+ > >+# Add support for writing debug log to Android logcat instead of > >standard > >+# output > >+#CONFIG_ANDROID_LOG=y > >+ > > # Enable privilege separation (see README 'Privilege separation' > >for details) > > #CONFIG_PRIVSEP=y > > > >@@ -407,7 +435,7 @@ CONFIG_DEBUG_FILE=y > > # This tracks use of memory allocations and other registrations > >and reports > > # incorrect use with a backtrace of call (or allocation) > >location. > > #CONFIG_WPA_TRACE=y > >-# For BSD, comment out these. > >+# For BSD, uncomment these. > > #LIBS += -lexecinfo > > #LIBS_p += -lexecinfo > > #LIBS_c += -lexecinfo > >@@ -416,15 +444,65 @@ CONFIG_DEBUG_FILE=y > > # This enables use of libbfd to get more detailed symbols for the > >backtraces > > # generated by CONFIG_WPA_TRACE=y. > > #CONFIG_WPA_TRACE_BFD=y > >-# For BSD, comment out these. > >+# For BSD, uncomment these. > > #LIBS += -lbfd -liberty -lz > > #LIBS_p += -lbfd -liberty -lz > > #LIBS_c += -lbfd -liberty -lz > > > >-# for p2p > >+# wpa_supplicant depends on strong random number generation being > >available > >+# from the operating system. os_get_random() function is used to > >fetch random > >+# data when needed, e.g., for key generation. On Linux and BSD > >systems, this > >+# works by reading /dev/urandom. It should be noted that the OS > >entropy pool > >+# needs to be properly initialized before wpa_supplicant is > >started. This is > >+# important especially on embedded devices that do not have a > >hardware random > >+# number generator and may by default start up with minimal > >entropy available > >+# for random number generation. > >+# > >+# As a safety net, wpa_supplicant is by default trying to > >internally collect > >+# additional entropy for generating random data to mix in with > >the data fetched > >+# from the OS. This by itself is not considered to be very > >strong, but it may > >+# help in cases where the system pool is not initialized > >properly. However, it > >+# is very strongly recommended that the system pool is > >initialized with enough > >+# entropy either by using hardware assisted random number > >generator or by > >+# storing state over device reboots. > >+# > >+# wpa_supplicant can be configured to maintain its own entropy > >store over > >+# restarts to enhance random number generation. This is not > >perfect, but it is > >+# much more secure than using the same sequence of random numbers > >after every > >+# reboot. This can be enabled with -e<entropy file> command line > >option. The > >+# specified file needs to be readable and writable by > >wpa_supplicant. > >+# > >+# If the os_get_random() is known to provide strong random data > >(e.g., on > >+# Linux/BSD, the board in question is known to have reliable > >source of random > >+# data from /dev/urandom), the internal wpa_supplicant random > >pool can be > >+# disabled. This will save some in binary size and CPU use. > >However, this > >+# should only be considered for builds that are known to be used > >on devices > >+# that meet the requirements described above. > >+#CONFIG_NO_RANDOM_POOL=y > >+ > >+# IEEE 802.11n (High Throughput) support (mainly for AP mode) > >+CONFIG_IEEE80211N=y > >+ > >+# Interworking (IEEE 802.11u) > >+# This can be used to enable functionality to improve > >interworking with > >+# external networks (GAS/ANQP to learn more about the networks > >and network > >+# selection based on available credentials). > >+#CONFIG_INTERWORKING=y > >+ > >+# Hotspot 2.0 > >+#CONFIG_HS20=y > >+ > >+# Disable roaming in wpa_supplicant > >+#CONFIG_NO_ROAMING=y > >+ > >+# Enable P2P > > CONFIG_P2P=y > > CONFIG_AP=y > > > >-# IEEE 802.11n (High Throughput) support > >-CONFIG_IEEE80211N=y > >+# bgscan > >+NEED_BGSCAN=y > >+CONFIG_BGSCAN_LEARN=y > >+CONFIG_BGSCAN_SIMPLE=y > > > >+# Enable WIFI Display > >+CONFIG_WIFI_DISPLAY=y > >\ No newline at end of file > >diff --git a/meta-arago-extras/recipes-connectivity/wpa- > >supplicant/wpa-supplicant-wl18xx_r8.a6.01.bb b/meta-arago- > >extras/recipes-connectivity/wpa-supplicant/wpa-supplicant- > >wl18xx_r8.a7.02.bb > >similarity index 78% > >copy from meta-arago-extras/recipes-connectivity/wpa- > >supplicant/wpa-supplicant-wl18xx_r8.a6.01.bb > >copy to meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa- > >supplicant-wl18xx_r8.a7.02.bb > >index f6c4f70..0ea9ff5 100644 > >--- a/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa- > >supplicant-wl18xx_r8.a6.01.bb > >+++ b/meta-arago-extras/recipes-connectivity/wpa-supplicant/wpa- > >supplicant-wl18xx_r8.a7.02.bb > >@@ -10,9 +10,14 @@ LIC_FILES_CHKSUM = > >"file://../COPYING;md5=ab87f20cd7e8c0d0a6539b34d3791d0e \ > > > > FILESEXTRAPATHS_append := "${THISDIR}/wpa-supplicant:" > > > >-# Tag: ol_r8.a6.01 > >-SRCREV = "7190ff7dbd43243290b626068ded0d61c5019050" > >-PR = "r2+gitr${SRCPV}" > >+COMPATIBLE_MACHINE = "(omap-a15)" > >+ > >+# Tag: ol_r8.a7.02 > >+SRCREV = "4dda294a5186f3efb437ae0898a6df71655843ef" > >+PR = "r4+gitr${SRCPV}" > > Why not reset the PR? Is there no corresponding PV bump for this release? > > >+ > >+SRC_URI += "file://0001-revert-android-patches-to-enable- > >wfd.patch;patchdir=.. \ > >+" > > > > # Add ti to the PV to indicate that this is a TI modify version > >of wpa-supplicant. > > PV = "2.0-devel-ti" > >-- > >1.7.9.5 > > > >_______________________________________________ > >meta-arago mailing list > >[email protected] > >http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago > _______________________________________________ > meta-arago mailing list > [email protected] > http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago _______________________________________________ meta-arago mailing list [email protected] http://arago-project.org/cgi-bin/mailman/listinfo/meta-arago
